This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeTools & Home ImprovementElectricalHome Automation Devices1PCS EWelink ZigBee 3.0 USB Dongle Mini EFR32MG21 Universal Open Source Gateway USB Dongle Chip Module ZHA NCP Home Assistant
Shipped from abroad
1PCS EWelink ZigBee 3.0 USB Dongle Mini EFR32MG21 Universal Open Source Gateway USB Dongle Chip Module ZHA NCP Home Assistant
GH₵ 746.30
GH₵ 1,045.5029%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 68.90 to Tema
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 68.90
Ready for pickup between 24 October & 29 October when you order within next 1hrs 56mins
Door Delivery
Delivery Fees GH₵ 80.80
Ready for delivery between 24 October & 29 October when you order within next 1hrs 56mins
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
Souchaci
60%Seller Score
Be the first to follow
Seller Performance
This seller does not have enough history for us to evaluate his performance yet
Product details
1PCS EWelink ZigBee 3.0 USB Dongle Mini EFR32MG21 Universal Open Source Gateway USB Dongle Chip Module ZHA NCP Home Assistant
- I am an international seller,100% brand new and of high quality
Description:
If the device is following Zigbee standards it is possible it will work with other gateway solutions, it is just not confirmed as working yet!
It comes pre-flashed with an unsigned EmberZNet 6.7.9 Zigbee NCP application firmware with Silabs standard EZSP v8 (EmberZNet Serial Protocol version 8) interface enabled as well as the standard Silabs Gecko Bootloader firmware for recovery, meaning it can be used either as-is out-of-the-box or flashed with custom application firmware via USB.
Hardware is at its core based onSilicon Labs EFR32MG21 Series 2 Multiprotocol Wireless SoC(part numberEFR32MG21A020F768IM32) and aWCH CH340E USB to Serial/UART Bridge Controller. While it only has a PCB circuit board antenna the radio has an integrated 20 dBm Power Amplifier (output power) and -104.5 dBm Receive Sensitivity which should be made for a very good Zigbee coordinator or Zigbee router if both hardware and firmware were properly implemented.
TheElelabs EZSP Firmware Upgrade Utility(https://github.com/Elelabs/elelabs-zigbee-ezsp-utility/) orwalthowd firmware update Docker image(https://github.com/walthowd/husbzb-firmware) can be used to flash the firmware to a newer or older version. New and old firmware official images are currently being provided at github (https://github.com/xsp1989/zigbeeFirmware/tree/master/firmware/Zigbee3.0_Dongle)
Specifications:
1、Pre-flashed with EZSP v8 (EmberZNet Serial Protocol version 8)
2、Can use ZHA in Home Assistant or Zigbee2MQTT (pre-alpha)
3、Base on EFR32MG21 CH340E
4、 20dBm output gain,PCB antenna
5、Plastic Shell
6、Support OTA Via Uart (Press the BOOT button,then press and release the nRST button, finally release the BOOT button)
7、Baud rate :115200
Package Included:
1*ZigBee3.0 Universal Gateway USB Dongle
Specifications
Key Features
Communication method : OtherCamera Equipped : NoState of Assembly : Ready-to-GoModel Number : ZigBee 3.0 USB DongleCompatibility : All CompatibleBrand Name : AubessOrigin : Mainland ChinaCertification : CE
Description:
If the device is following Zigbee standards it is possible it will work with other gateway solutions, it is just not confirmed as working yet!
It comes pre-flashed with an unsigned EmberZNet 6.7.9 Zigbee NCP application firmware with Silabs standard EZSP v8 (EmberZNet Serial Protocol version 8) interface enabled as well as the standard Silabs Gecko Bootloader firmware for recovery, meaning it can be used either as-is out-of-the-box or flashed with custom application firmware via USB.
Hardware is at its core based onSilicon Labs EFR32MG21 Series 2 Multiprotocol Wireless SoC(part numberEFR32MG21A020F768IM32) and aWCH CH340E USB to Serial/UART Bridge Controller. While it only has a PCB circuit board antenna the radio has an integrated 20 dBm Power Amplifier (output power) and -104.5 dBm Receive Sensitivity which should be made for a very good Zigbee coordinator or Zigbee router if both hardware and firmware were properly implemented.
TheElelabs EZSP Firmware Upgrade Utility(https://github.com/Elelabs/elelabs-zigbee-ezsp-utility/) orwalthowd firmware update Docker image(https://github.com/walthowd/husbzb-firmware) can be used to flash the firmware to a newer or older version. New and old firmware official images are currently being provided at github (https://github.com/xsp1989/zigbeeFirmware/tree/master/firmware/Zigbee3.0_Dongle)
Specifications:
1、Pre-flashed with EZSP v8 (EmberZNet Serial Protocol version 8)
2、Can use ZHA in Home Assistant or Zigbee2MQTT (pre-alpha)
3、Base on EFR32MG21 CH340E
4、 20dBm output gain,PCB antenna
5、Plastic Shell
6、Support OTA Via Uart (Press the BOOT button,then press and release the nRST button, finally release the BOOT button)
7、Baud rate :115200
Package Included:
1*ZigBee3.0 Universal Gateway USB Dongle
Description:
If the device is following Zigbee standards it is possible it will work with other gateway solutions, it is just not confirmed as working yet!
It comes pre-flashed with an unsigned EmberZNet 6.7.9 Zigbee NCP application firmware with Silabs standard EZSP v8 (EmberZNet Serial Protocol version 8) interface enabled as well as the standard Silabs Gecko Bootloader firmware for recovery, meaning it can be used either as-is out-of-the-box or flashed with custom application firmware via USB.
Hardware is at its core based onSilicon Labs EFR32MG21 Series 2 Multiprotocol Wireless SoC(part numberEFR32MG21A020F768IM32) and aWCH CH340E USB to Serial/UART Bridge Controller. While it only has a PCB circuit board antenna the radio has an integrated 20 dBm Power Amplifier (output power) and -104.5 dBm Receive Sensitivity which should be made for a very good Zigbee coordinator or Zigbee router if both hardware and firmware were properly implemented.
TheElelabs EZSP Firmware Upgrade Utility(https://github.com/Elelabs/elelabs-zigbee-ezsp-utility/) orwalthowd firmware update Docker image(https://github.com/walthowd/husbzb-firmware) can be used to flash the firmware to a newer or older version. New and old firmware official images are currently being provided at github (https://github.com/xsp1989/zigbeeFirmware/tree/master/firmware/Zigbee3.0_Dongle)
Specifications:
1、Pre-flashed with EZSP v8 (EmberZNet Serial Protocol version 8)
2、Can use ZHA in Home Assistant or Zigbee2MQTT (pre-alpha)
3、Base on EFR32MG21 CH340E
4、 20dBm output gain,PCB antenna
5、Plastic Shell
6、Support OTA Via Uart (Press the BOOT button,then press and release the nRST button, finally release the BOOT button)
7、Baud rate :115200
Package Included:
1*ZigBee3.0 Universal Gateway USB Dongle
What’s in the box
1x packages
Specifications
- SKU: GE779IP43CTKRNAFAMZ
- Model: SM-ZDDHTJ-9-21-3760
- Production Country: China
- Size (L x W x H cm): 20x10x20
- Weight (kg): 0.4
- Color: ZigBee USB Dongle
- Main Material: other
Verified Customer Feedback
This product has no ratings yet.
1PCS EWelink ZigBee 3.0 USB Dongle Mini EFR32MG21 Universal Open Source Gateway USB Dongle Chip Module ZHA NCP Home Assistant
GH₵ 746.30
GH₵ 1,045.5029%
Questions about this product?