18650/21700 Lithium Battery Capacity Tester Module High Precision Type-C USB

【 Fast delivery 】 Product features:

The product supports single channel capacity and internal resistance measurement

Support separate charging and discharging, and support up to 9 charging and discharging cycles in automatic mode

The stop discharge voltage is adjustable in 11 gear

Using DC two-wire method to test internal resistance Chinese English switchable

The maximum charging and discharging current is about 1A

【 Fast delivery 】 Be careful:

During the charging and discharging proce, some components will produce local high temperature. Please ensure that the use environment is open and uncovered. It would be better to increase the fan heat diation.

In order to ensure that the battery cl is firm, the 18650 battery holder uses a compact battery holder, which is suitable for flat battery measurement!!!

It does not support charging of lithium iron phosphate battery

【 Fast delivery 】 Basic parameters

Working power supply: DC5V power supply or 18650/21700 battery (self prepared)

Applicable battery: all batteries that meet the requirements of 2.5~3.5V stop discharge voltage and 2.8~4.2V full charge voltage are applicable

Power supply interface: Type-C interface, self provided power supply line (C-port mobile phone line)

System language: Chinese (default), English

Test quantity: 1 circuit charge and discharge measurement (only for the right battery position)

Internal resistance measurement: Yes, DC two-wire method is used to measure the internal resistance

Charging function: support, automatic cut-off charging when fully charged (does not support charging of lithium iron phosphate battery)

Discharge function: support, automatically stop when conditions are met, and the discharge current is not adjustable

Automatic charging and discharging: Yes, the battery is fully charged at the end of automatic mode

Cyclic charging and discharging: supported, adjustable for 1~9 cycles (only supported in automatic mode)

Status prompt: Supported

Stop discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 adjustable

Discharge current: two circuits of resistance, the maximum current is about 1A, which cannot be adjusted and does not support independent

Charging voltage: controlled by special battery charging ch, the maximum charging voltage is about 1A, and the full charging voltage is 4.2V

Save in case of power fai: save only the setting parameters, not the metering data

Product weight: 80g (net weight) 120g (including packaging)

Product size: 110 × eighty-eight × 30mm

Package size: 153 × one hundred × 42mm

Information link: https://www.banber.com/banber/63759cb5186c0a15f2d2d4c0

【 Fast delivery 】 Delivery list:

18650/21700 battery capacity internal resistance tester X1 (Battery not included)

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.