18650 Lithium Battery Capacity Automatic Internal Resistance Battery Power Module Dual Type-C Interface

This product supports single internal resistance and capacity measurement; supports charging and up to 9 charging-and-discharging cycles in automatic mode. It not only can be used to charging battery, but also can be used to  measure the battery internal resistance and capacity. And more ant, it can be used to dispense battery capacity and run cycles. 



Features:

Dial Display: 1.77inch dial display, clearly display the real time voltage, real time current, real time power, accumulated capacity, accumulated energy, status indication, operating mode, stop discharge voltage, number of cycles, battery internal resistance and accumulated time.

Multifunctional Design:It not only can be used to charging battery, but also can be used to  measure the battery internal resistance and capacity. And more ant, it can be used to dispense battery capacity and run cycles. 

Three Working Modes Design:Preset automatic, charging and discharging three modes, switch to the corresponding mode, the program automatically run, the discharge current can be switched for ease of use.

Charging Function:External 5V power supplys, maximum 1A current through the charging chip when charging, and the charging process will record the capacity and energy amount charging time. Not suitable for charging LiFePO4 batteries.

Internal Resistance Test:The product uses the direct current 2-wire method to test the internal resistance of the battery, with high accuracy when the battery is fully charged.

Capacity Test:The capacity test is carried out by resistance discharge, and the results are only the capacity measured between the starts of the battery discharge during the test phase and the trier stops. The cumulative capacity, energy and time are recorded during the discharge process.

Battery Capacity Division and Running Cycle:The battery capacity dividing and running cycle is a process of charging, discharging and recharging. The stopping voltage cannot be lower than 2.8V when in use, otherwise it cannot be charged and the program cannot run properly.

Data Clear Function:Automatic zeroing of capacity, energy and time data when switching off and switching modes.

Language Switching:Two working languages design, the factory default language is Chinese, but you can freely switch according to your preference.



Specifications:

Name: Battery Capacity

Material: printed circuit board

Working power supplys: DC5V power supplys or lithium battery battery need to prepared by yours

Applicable battery: meet the stop discharge voltage of 2.5-3.5V, 2.8V starts 4.2V full battery are applicable too.

Power supplys interface: Type-C interface, power supplys cable s-provided C-port mobilephone cable

System language: Chinese default, English

Number of tests: 1- charging and discharging measurement right-hand battery position only

Internal resistance measurement: supported, using the direct current two-wire method to test internal resistance

Charging function: supported, full automatic cut-off charging LiFePO4 charging not supported

Discharge function: supported, automatic stops when conditions are met, discharge current is not adjustable

Automatic charging and discharging: supported, battery is fully-recharged at the end of automatic mode

Cycle charging and discharging: supported, 1~9 cycles adjustable only supported in auto mode

Status indication: supported

Stops discharge voltage: 2.5V, 2.6V, 2.7V, 2.8V, 2.9V, 3.0V, 3.1V, 3.2V, 3.3V, 3.4V, 3.5V, 11 levels adjustable

Discharge current: two-way , max. 1A current, not adjustable, does not support independent nsformation

Charging voltage: special battery charging chip control, max. 1A charging, full-charged voltage is 4.2V

Power fai save: only the setting s are saved, not the measurement data

Item size: 110 * 89 * 30mm / 4.33 * 3.50 * 1.18in

Item weight: 80g / 2.82ounce

Package size: 153 * 100 * 42mm / 6.02 * 3.94 * 1.65in

Package weight: 120g / 4.23ounce



Packing List:

1 * Battery Capacity

Many Questions about Dropshipping Services Are As Follows:

1.How many orders can you handle per day?

we are a large company in Shenzhen,China,with a large warehouse that can handle large orders everyday.We send out countless parcels everyday.We can guarantee the order you request.

2.How fast can you process orders?

We will arrange shipment as soon as possible after you pay the order.Priority delivery for dropshipping order

3.Could you ship order without any receipts,invoices and promotional offer inside the package?

Absolutely!No invoices,receipts,promotional offer if you leave notes on the orderif you want,we can provide.

4.If you need other products?

We can provide most products you need as much as possible1

If you have any other questions,please feel free to contact us.

We are very grateful to cooperate with you.

5.We can support CSV/Excel File Dropshipping.

6.There is no limited stoto fulfill the orders on a daily basis