180° Rotation Alarm CloTemperature Date Night Mode Snooze Table Clo12 24H USB LED Dial Clock

Function Introduction:

1 High-definition LED display: time 12/24-hour system conversion, date, temperature. Can project the current time at the same time.

2 Alarm clo& snooze: a set of alarm clock, press SNZ/LIGHT to enter snooze.

3 Temperature measurement range: -10~50℃ or 14-122℉.

4 Brightness Adjustment Function: 3 levels of brightness can be adjusted.

5 Night mode 18:00-6:00, LED light will automatically dim at night.

6 Can be powered by 3 AAA batteries shipped without batteries or plued into USB power supply DC 5V-1A, the alarm cloturns off the screen after 30 seconds when only using battery power.

Product list:

1*clock, 1* USB power cable,1* manual.

Instructions for use and operation

1.Basic operation

1. In any setting state, no key operation within 15 seconds, return to time mode.

2. During setting, the setting item blinks.

3. Short press + or - key, setting item "plus 1" or "minus 1", press + or a, setting item accelerate increase or decrease.

4. Driven by AAA battery, press any key, the display will light up with 30 seconds delay.

5. In time state, press + key to switch LED brightness three steps.

6. In any state, press SNZ/LIGHT key, the displays the current time or turn off the , press SNZ/LIGHT key when the alarm clois ringing to enter the snooze state.

7. When the projected time needs to be rotated 180 degrees, press SWAP to rotate or not rotate the projected display.

8. press SNZ/LIGHT key in any state to turn off the screen display, then press any key to redisplay the screen. Anti night disturbance sleep.

2.Description

1. The default display is January 1, 2023, and the year range is 2000-2099.

2. When the alarm clois ringing, the ringing tion of 1 minute is: BIBIBIBI ringing, no key operation within this minute will stop end ringing. And press SNZ/LIGHT to pause the alarm, start the snooze function, the AL logo will f, wait until the set snooze time period will continue to alarm. Continue the above cycle of alarm process. Press other ons MODE, ALARM, UP and DOWN to stop end the alarm. The default snooze time is 5 minutes. Only when the AL symbol is displayed, it means the alarm is on. And when the AL flag is not displayed, the alarm clofunction is turned off.

3. The temperature is measured and detected every 10 seconds, when the temperature is lower than -10℃, it shows -10℃, and higher than 50℃, it shows 50℃.

Tips:the alarm cloturns off the screen after 30 seconds when only using battery power.If you want the cloalways keep on,you need connet the power supply.And this closhipping without batteries.