170° 1/4" CCD Car Front View Side View Blind Spot Camera Waterproof Night Vision

Technical Specifications:
Color: Black
Material: Plastic
Image Sensor: 1/4 "CCD color
TV System: NTSC and PAL
Effective pixels: 728 x 512
Resolution: 480 TV lines
Video Output: 1.0Vp-p, 75
Electronic Shutter: 1/60 (NTSC) -1 / 10000s, 1/50 (PAL) -1 / 10000s
Waterproof Grade: IPX 67
Power supply: 12V DC
Currentcomsumption: 130mA
Current consumption: 90 mA max
Operating Temperature: -23~ 60(degrees Celsius), RH95% Max
Storage temperature: -35 ~ 70(degrees Celsius), RH95% Max
Lens Angle: 170 degree
Image: Mirrorred without grid lines
Sensingarea: 5.78mm x 4.19mm
Size: 50 x 30mm / 2" x 1.2"

Installation:
1. Set the camera to the license plate of your car site
2. Adjust the camera lens to its best position.
3. Connect the power cord (red and black) to spotlight the power wires of your car.
4. Connect the video output (yellow) on the display.

Features and Benefits:
● High definition and up to 170 degrees wide viewing angle.
● Support NTSC video system.
● This camera can give you a full sight of the back of your car when you are driving.
● Night vision camera, you can easily get the clear situation in the dark.
● IP67 waterproof design
● It helps to avoid incidents, accidents abrasion and ensure your safety.
● Compact design, super easy to install and operate.
● With high sensitivity, you can get rid of the poor rear vision.
● Can connect to any type of monitor with a composite yellow RCA jack.
● Applicable to variety of vehicles: car, truck, RV, etc.
● Easy installation and can be installed in several ways, Mounts easily to existing license plate screws - no new mounting holes required

Notice:
1. Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid.
2. The color may have different as the difference display,pls understand.