150W 200V 20A Electronic Load Tester USB Adjustable Current

Electronic Load Tester 150W 200V 20A USB Adjustable Testing Module Power Meter

and high quality

Features:

Made of high quality material, solid, durable and practical, good performance and long lasting.

LCD screen, display information comprehensively and clearly.

Configuration of intelligent fan can diipate the heat effectively and quietly.

Load maximum power 150W, max voltage 200V, max current 20A.

Over voltage, over current, and over preure alarm can protect the module from damage effectively.

Widely used for testing various batteries, DC power supply, and charging data lines.

Specification:

Material: Fiber Gla Board, Electric Components

Size: app.15.6 x 9.6 x 5.8cm/6.14 x 3.78 x 2.28in

Color: Yellow and Purple and Grey

Quantity: 1 Set

Product Parameter:

Input/Output Interface: 100A high current bite screw column

Voltage Measurement Range: 0.00V-200V                        Resolution accuracy: 0.01V

Current Measurement Range: 0.00A-20A                          Resolution accuracy: 0.01A

Capacity Accumulation Range: 0-999.999Ah                     Resolution accuracy: 0.01Ah

Power Accumulation Range: 0-9999.9Wh                          Resolution accuracy: 0.01Wh

Power Measurement Range: 0000.00-150 W                    Resolution accuracy: 0.01W

Impedance Measurement Range: 1-999.9s               Resolution accuracy: 0.01s

Temperature Measurement Range: 0-99℃/32-210.2℉     Resolution accuracy: 1 ℃

Timing Maximum Time: 999 hours 59 minutes 59 seconds Resolution accuracy: 1 second

Timing Measurement Reminder Setting: countdown 24-hour arbitrary setting

Small Current Standby Remind Parameter and Timing: Le than 2W/0.5 hours; Over 0.5W to start timing, DC 4-30V supplies power to the measurement system

Refresh Time: Over 500mS/time

Measurement Rate: About 0.5 times/sec

Overvoltage and Overcurrent Setting Alarm Mode: Display warning interface to remind users

Overvoltage Reminder Setting Range: 1-200V

Low preure Reminder Setting Range: 0-190V

Overcurrent Reminder Setting Range: 0.2-100A

Display Type: Micro-power LCD module LCM black font green backlight Chinese and English display

Working Temperature: -10 - +60℃/14 - 140℉

Working Humidity: 10 - 80 (No glazed frost)

Working Preure: 80 - 106kPa

Instruction for Connection and Operation :

1. Open the package, insert the power adapter into the end of the product and supply the power.

2. Anti-clockwise rotate the two current knobs to the lower limit.

3. Connecting the Power Supply under test to the product according to the diagram above, and the current input voltage value will be read out. Keep preing the key to reset all data to zero;

4. Slowly clockwise rotate the two current knobs (coarse&fine) to adjust the current to the rating value of the Power Supply(The current should be slowly adjusted, using the fine knob priority, the coarse knob could be only used under large current condition.)

5. When testing the battery, Low voltage discharge limit should be set up, to avoid the poible damage caused by over discharging while discharge capacity test of the battery.

Note:

No retail package.

Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!

Package includes:

1 x Electronic Load Tester

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.