1500W 30A DC DC Voltage Converter CV Boost Converter Step Up Adjustable Module 10-60V to 12-90V Boost Power Supply Module

1500W 30A DC DC Voltage Converter CV Boost Converter Step Up Adjustable Module 10-60V to 12-90V Boost Power Supply Module Descrtion:

Module name: 1500W boost constant current module Module characteristics: non-isolated boost module (BOOST) Working temperature: -40~+85 degrees Working frequency: 150KHz Conversion efficiency: 92%-97% (efficiency has an effect on input voltage, output voltage, current and preure difference) Installation: 4 3mm columns Connection method: terminal block (please use high current and pure copper wire) Module size: 130mm x 52mm x 84mm (length x width x height)

Product Specifications: Input voltage: 10-60V Input current: 30A (10-30V input) 25A (31-60V input) Static working current: 15mA Output voltage: 12-90V continuously adjustable (default output 19V) Output current: MAX 20A, more than 15A, please strengthen the cooling (affects the input and output, the differential preure, the greater the preure difference between the input voltage and the output voltage, the smaller the current) Constant current range: 0.8-20A (+/- 0.3A) Output power: = input voltage × 30A Features:

1. Current protection: The input error range above 35A has a certain range, and the output voltage is automatically reduced. 2. Short-circuit protection: There is (input 30A fuse) dual-circuit short-circuit protection, which is safer to use. 3. Input reverse polarity protection: Yes (150A MOS tube avoids this situation).

Pay attention to the followins when using boost power supply: The output polarity cannot be reversed or short-circuited. 2. When using a battery as an input source, the battery protection must be lowered, otherwise the battery and power supply will be damaged The input power supply voltage must be higher than 10V. 4. When the input power supply is used, the input voltage and output voltage of the input power supply must be unloaded first. Then pick up the load. (It must be ensured that the switching power supply is always working). 5. When using the constant current mode to set the voltage, the constant voltage must be higher than the input voltage. Do not use short-circuit output current. The circuit structure of the boost module cannot be adjusted in a short-circuit. 6. If the input voltage fluctuation range is lower than the set output voltage, the output voltage is constant to ensure that the input is lower than the output voltage.

Checklist:

1×1500W boost constant current module

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.