12VHPWR 4W 16Pin(12+4PIN) PCI-E 5.0 adapter ATX3.0 Power Supply Connector for RTX 4090 4080 4070 Ti 3090 Graphics Card

ATX3.0 Power Supply Connector 16Pin(12+4PIN) 4W Graphics Card GPU Power Supply Adapter for RTX 4090 4080 4070 Ti 3090 Graphics CardFeature:1. Strong Compatibility:This 12VHPWR 4W 12+4PIN PCI-E 5.0 adapter is designed specifically for the latest RTX 4090 4080 4070 Ti 3090 Ti graphics card. Please note that the graphics card brands applicable to the adapters in different directions may be different!2. Up to 4W Output:This adapter supports RTX4090 with a maximum output of 4W. Long term use of power output exceeding 4W may cause equipment damage. Pay attention to maintaining a good ventilation environment inside the chais.3. 90 ° Right Angle Design:Connect the power cord and GPU interface, without causing preure on the GPU graphics card interface, and ensure long-term stable use. This design will reduce the preure on connectors and cables, making them safer during aembly and long-term use, effectively avoiding the difficulty of cable arrangement caused by the graphics card bracket, and beautifying the power wiring of the graphics card.4. High Quality Material:ABS rubber shell, PCB board, all copper tin plated, with good conductivity, high fire resistance rating, anti-aging, easy to plug and unplug, thickened and thick copper foil to ensure the stability of high-power graphics cards, beautiful appearance for operation and use, equipped with shell protection, different from other similar products only with bare boards or EVA pads.5. Warm Tips:Please ensure that the adapter is fully inserted into the GPU and there should be no gaps. It is not recommended to use graphics cards with overclocking power consumption higher than 4W; Please ensure that the power cord connector is fully inserted into the adapter (bending fro5mm of the connector) to avoid the connector not being fully inserted due to exceive bending angle of the power cord. This can cause uneven current load on the terminals and damage due to heat accumulation during full load operation of the GPU.Specification:Material: plastic+PCB+tinned copperColor: black, white (optional)Direction: Forward STD, Reverse RVS (optional)Interface: 16Pin (12+4PIN) male and female connectorsPower: 4WQuantity: 1pcFunction: Connect the graphics card power supply to a 90 degree turn, beautify the graphics card power wiring, reduce the height of the power cord, and use this adapter to easily cover the side panelSize: about 39 * 28 * 21mm/1.53 * 1.10 * 0.82inchWeight: 10gCompatibility:Forward STD:Applicable models: for Asus ROG-STRIX-RTX4090, for Asus TUF RTX 4090 GamingUnsuitable models: Nvidia GeForce RTX 4090, GeForce RTX 4090 Wind force, GeForce RTX 4090 Gaming, Aorus GeForce RTX 4090, Xtreme WaterforceReverse RVS:Applicable models: Nvidia GeForce RTX 4090, GeForce RTX 4090 Gaming, Aorus GeForce RTX 4090, Xtreme WaterforceUnsuitable models: for Asus ROG-STRIX-RTX4090, for Asus TUF RTX 4090 Gaming, GeForce RTX 4090 Wind forceSelection Instructions:Step 1: Confirm the number of pins on the graphics card power interfaceStep 2: Confirm the orientation of the interfaceAttention: Please pay attention to the direction of the GPU connector before purchasing (forward or reverse)Warm Tips: This connector is 16Pin (12+4PIN)!

Note:Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.

1 x Power Supply Adapter

.