Features:1. The car is made of high-quality plastic and high-strength metal, which is convenient and ble. It is a very good for heating, defrosting and defoing.2. Small size, large heat, low noise, fast heating; the temperature of a single outlet can reach 80-100℃.3. Energy saving, environmental protection and power saving, as long as there is electricity, it can be used for a long time without affecting ignition.4. Convenient installation and connection, simple to use, can be fixed on the workbench with s-tapping screws, or fixed on the side in a p.5. Enjoy warmth in the cold winter. It is widely used to increase the internal temperature of the car, warm the hands and feet, and defrost and defog the car windshield. It is suitable for coastal and mountainous areas with large temperature differences and easy fog and frost in autumn and winter.
Specifications:Name: Car Electric Heating DefrosterColor: whiteMaterial: metalVoltage: 12V/24VPower: 500W-1000WControl method: manualType: Use time: as long as there is electricity can be used for a long timeAir outlet: 3Switch on: 1The temperature of a single outlet can reach: 80-100℃Outlet diameter: about 3.5cm / 1.38 inchInstallation size: about 28cm*14cm*10cm/11.02*5.51*3.94inchPacking size: about 32.5cm*20cm*11cm/12.80*7.87*4.33inchWeight: about 1.35kg
InstallationNotes:1. Keep a certain distance between the air outlet and the gla to prevent the gla from g damaged.2. It can be fixed on the workbench with s-tapping nails, or fixed on the side in a p.3. It is recommended to use insurance to avoid short circuit damage to the circuit.4. Do not worry if there is e during the first use.5. It is recommended to install an aluminum air outlet to avoid ing plastic products.7. Check whether the fan is running during use to avoid damage to the workbench.
Notes:1. It is strictly forbidden to open the internal circuit and privately modify the circuit, and it is forbidden to block the air inlet and outlet.2. Do not touch metal products during use to prevent high temperature s.3. Please connect firmly during installation to prevent the line from breaking and short-circuiting on poor roads from causing fire.4. Do not connect the positive and negative poles wrongly during use to avoid wind, the red wire is connected to the + level, and the black wire is connected to the-level.5. It is forbidden to use a arette to prevent damage to the line. It is recommended to use more than 3 wires to connect the battery directly.
6. Do not use it for a long time after flameout, so as not to consume the battery and affect the start.
Packing List:1 * Car 2 * 3 * Fixed Ring3 * Aluminum Duct
1* Connection Wire