12V Panel Wall Mount PD and Dual QC 3.0 USB Charger Socket with on Switch Power Outlet Accessories for Car Bus RV Truck

Feature:

-No need to a big hole: Surface mounting, can be installed on a flat surface, no need to open a big hole, just open a small hole, put the wire in, the blawire connects to the negative pole, the red wire connects to the positive pole, tighten the screws and cover the lid.

-Charge 3 devices at the same time: This 12V USB panel outlet is upgraded with 3 ports and equipped with a smart chip. It can charge 3 devices at the same time without interfering with each other, the PD port has a maximum output of 36W, and the QC port has a maximum output of 18W.

-Anti-slip power swith: Compared to the unswitched designs on the market, our upgraded 12-volt USB socket adds a sleek, non-slip push-on switch. This prevents the battery from g drained by the LEDs g constantly lit, effectively extending the life of the battery. Note: The switch is off by default.

-Easy to open cover: Unlike the spring-loaded covers commonly found on the market today, ours is a flip-top dust cover that not only prevents water droplets and dust from seeping in, but also simplifies the proce of pluing and unpluing the device, which eliminates the inconvenience of a spring-loaded cover that often pops open. (Recommended for use in an indoor automotive environment, away from water and harsh weather conditions).

Note:

1. When not in use, cover the USB protective cover to prevent the ingre of dust and water.

2. For mobile phones that support fast charging, you must use the charging cable or the fast charging cable to achieve fast charging

User Manual:

"http://ae01.alicdn.com/kf/Sdb9c24f434274f30b952d740291aba56W.jpg" />