12V Car Battery Tester LCD Digital Battery Measurement Analyzer Charge

Type 1:

Features: With multle protections, input overvoltage protection, reverse connection protection, poor contact of the test cl detection prompt, safer to use. Quickly and accurately detect the battery status and prevent the car from breaking down midway. It can be directly connected to the battery of the car for testing, no need to remove the battery, more convenient. It can detect and display battery capacity SOC and health status SOH, which are displayed as a percentage. Through the low frequency signal injection test, there is no need to connect a large load discharge test, and it will not cause damage to the battery. The battery voltage status and battery discharge capacity can be detected, and the display can be switched by moving up/down ons. Wide application, it is suitable for car lead-acid starter batteries, including regular flooded, EFB, AGM tablet battery, AGM winding battery, GEL battery,WET, etc. Specifications: Material: ABS Applicable Battery Voltage: 12V/24V Voltage Measure Range: 8-30V Test Range: 3AH-200AH Test result: SOH, SOC, CCA Value, IR,  etc. Test standards: CCA, SAE,DIN, IEC, EN, CA Working Temperature: -40-60℃ Item Size: 150 * 90 * 35mm/ 5.9 * 3.5 * 1.4in Item Weight: 325g/ 11.5oz Package Size: 165 * 110 * 55mm/ 6.5 * 4.3 * 2.2in Package Weight: 400g/ 14.1oz Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color shown on the pictures. Packing List: 1 * Car Battery Tester 1 * Manual

Type 2:

Microproceor control (CPU).

• Level 7 automatic charging:

• This is a fully automatic battery charger with 7 charging stages.

• Automatic charging prevents overcharging of the battery. So you can leave the charger connected to the battery indefinitely.

• Level 7 charger for most battery types, including calcium, gel, AGM, wet lead-acid batteries. They may also help restore depleted and sulfuric acid batteries.

• Battery Type: Most types of lead acid batteries include calcium, gel, AGM, wet, lead acid, etc. .

• Switchmode Technology: Yes

• Polarity Protection: Yes

• Output short circuit protection: yes

• Non-battery link protection: yes

• Overvoltage Protection: Yes

• Over temperature protection: yes

•cooling fan

• Input voltage: 100-240V AC, 50-60Hz

• Rated output: 12V 7A

• Minimum startup voltage: 8.0V

• Battery range: 6-120Ah

• Thermal protection: 65℃+/-5℃

• Efficiency: Application. 85%.

• Compliant with standards: CB, CE, IEC60335, EN61000, EN55014

• Dimensions (L x W x H): 150 x 90 x 62 mm

• Weight: 520g

Type 3

Package including:

1 x DC3-36V Auto Circuit Tester Pen

1 x Lamp Holder

4 x Testing Bulbs (2 x 12V bulb, 2 x 24V bulb)

1 x User Manual (PDF Manual Download QR)

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.