12V 60W Oil Scavenge Extr tor Scavenge Exchange nsfer Suction nsfer and Tubes For Auto Car Boat Truck

Description:

- Rated Voltage: DC 12V- Rated Power: 60W- Maximum Preure: Max. 0.8MPA- Maximum Flow: 5L/min- Diameter: Approx. 4.8cm / 1.89inch- Length: Approx. 14.5cm / 5.7inch- Outlet size(Dia.*L): Approx. 11mm*140cm/0.43*55inch- Inlet diameter: Approx. 8mm,6 mm Length: Approx. 100cm/ 39.37inch- Cable Length: Approx. 30cm / 11.8inch- Clips Length: Approx. 8cm / 3.15inch- Main Color: Bl k- Application: Widely used in general industrial equipment, equipment, equipment, shipbuilding, drinks, carpet and floor cleaning, water and water treatment equipment, vehicle cleaning, agritural spraying, zo line preure, air cleaning cooling, coal and metallurgical industries- Note: If you want to connect this to power, you will need a power converter.-

How to use:

- Startto runthe carengine for a while, whenoiltemperatureturns to be about50degrees,startingoil.- Connect the to the power, run it for a while, and observe whether the inlet and outlet is normal.- Open the filler cap,get dipstiout, force the tube into the bottom of the joint, until the tube does not move; then put the inlet from the oil dipstiinto in end (the tube into the bottom of the tank, the bottom concave pl e, in order to the oil completely); as no oil or ing up very slowly or intermittently, it is generally caused by loose s and fittings. You have to install the s and fittings again.)- After oil ing, remove the tube, and then run the for a while, the remaining oil inside the ing clean, or water for a while until the head gets clean.- If you have not used it for a time, it may have no suction, then just pour the water in the , and run the for a few minutes until the air is all out.

P kage Includes:

1x Oil

1x 11mm outlet

1x 8mm hose

1x 6mm hose