12V 2-lamp Car Headlight Modification Wiring Harness

12V 2-lamp Car Headlight Modification Wiring Harness
1. Ceramic lamp holder, high temperature resistance.
2. Directly insert the relay, which is convenient and quick.
3. High temperature resistant nylon fuse box.
4. Transparent sealant, waterproof, copper coil, not easy to rust, good conductivity.
5. Working principle and performance:
After the car has been used for a certain period of time, the headlight circuit has a certain degree of aging, which causes the voltage drop to increase and flow to the headlights.
The current at the terminal becomes smaller, and the headlights are not bright enough. Most car ownersa?? practice is to directly replace high-power light bulbs, but this makes
The aging automobile circuit bears a larger current, which is very easy to cause ablation, and it is also easy to burn out the combination switch.
The correct approach is to install a set of car headlight enhancers while installing high-power bulbs. The advantages of this are:
(1) The brightness of car headlights increases by about 30%;
(2). The current mainly passes through the wiring harness of the brightener, and the original car circuit only passes through the micro current which plays a role of control, so as to protect
The combination switch and the original car circuit.