1/2/5/10PCS JQ6500 Voice Module MP3 Module MCU Serial Port Control Broadcast One-To-One 5-Way Control Music IC

Model Number : HW-896 Voice Sound ModuleCondition : NewType : Voltage RegulatorBrand Name : TWO TREES : Mainland ChinaUART Interface : Standard Serial Port, TTL LevelInput Voltage : 3.5V-5VRated Current : 20mASpeaker Power : 8Ω/3W
Product DescriptionThe module uses the JQ6500 chip, which is an MP3 chip that provides a serial port and perfectly integrates the hard deing of MP3 and WMV. At the same time, the software supports TF card driver, supports computer to directly update spifash content, and supports FAT16 and FAT32 file systems. Functions such as playing specified music and how to play music can be completed through simple serial port instructions without cumbersome underlying operations.Product 1.MP3 file format:Supports all bitrate 11172-3 and IS013813-3 layer3 audio deing;Sampling rate (KHZ):8/11.025/12/16/22.05/24/32/44.1/48;Supports Normal, Jazz, Classic, Pop, Rock and other sound effects;2.UART interface: standard serial port, TTL level;3. Input voltage: The power supply is 3.5V-5V, the best is 4.2V;4. Rated current: 20ma;5. Speaker power: 8Ω/3W;FeaturesSupport sampling rate (KHz):8/11.025/12/16122.05/24/32/44.1/48;24-bit DAC output, dynamic range supports 90dB, signal ratio supports 85dB;Fully supports FAT16 and FAT32 file systems;Multiple control modes, serial port mode, AD on control mode,Broadcast language interruption function can pause the background music being played;Audio data is sorted by folders, up to 100 folders are supported, and each folder can be assigned 1,000 songs;30 levels of volume adjustable, 10 levels of EQ adjustable;Plug-in 32Mbits (4M) spifash memory, connect to the computer to display the spifash drive letter and update the content;The specified music can be played through the serial port of the microcontroller;In the key mode, you can select the playback mode: pulse repeatable, pulse non-repeatable, level non-holding cyclic, level maintenance cyclic;Comes with Micro USB interface;Onboard signal indicator blue LED;ApplicationsCar navigation voice broadcast;Road transportation inspection and toll station voice prompts;Voice prompts for security checks at train stations and bus stations;Voice prompts in power, communications, and financial business halls;Voice prompts for vehicle entry and exit verification;Voice prompts for public security border inspection channels;Multi-channel voice alarm or equipment operation guidance voice;Voice notice for safe driving of electric sightseeing cars;Automatic alarm for mechanical and electrical equipment failures;Fire voice alarm promptAutomatic broadcast equipment, scheduled broadcast;Notice:1. When using, press and hold the on for 1 second.2. If mode 1 and mode 2 are used, when the module is powered by USB and connected to the computer, the indicator light is always on. After pressing the on, the indicator light will light up when the speaker is playing, and will not light up when not playing.3. If the speaker does not sound or the sound is hoarse but the light is on normally, it is caused by insufficient power supply of the module (if the speaker sound is too low, you can connect it to the computer through the module USB or supply power through the serial port block; if the sound is too loud and the sound is hoarse, you need Connect another power supply to provide stable power supply to the module)