Feature:
Suitable for vertical e control, crystal lamp, modern low-voltage lamp, ceiling lamp, day flower lamp, fluorescent lamp, energy-saving lamp, exhaust fan, LED lamp, etc.
The installation is fast, not blocked by the wall, and can connect any load. The e controller and switch can be used at the same time, which is convenient and flexible.
Each group of e control switches has its own special code. More suits can be used in one room without interference.
Specification:
1 way e control switch:
e control distance: within 30m
Input voltage: 180-240V
Load per port: Fluorescent lamp: 600W; Energy-saving lamp: 300W
Working temperature: -20Celsius+60Celsius
Material: ABS
Size: e control: 9cm * 4cm * 1.5cm; main device: 6.0cmx4.5cmx2.5cm
Power supply: 12V 23A battery not included
2 way e control switch:
1. Working voltage: AC180V-240V50Hz / 60Hz
2. e control battery: 12V 23A battery battery not included
3. e control distance: indoor greater than 20-30 meters
4. Load power: 1
5. Resistive load: the maximum output power of single group within 1000W such as lamps or s, etc.
3 way e control switch:
Function:
1. After power on, A/1 will light up.
2. A/1 is used to turn on/off the blue group, B/2 is used to turn on/off the green group, "ON"/"OFF" means to turn on/off the entire project.
3. Manual lighting sequence wall switch control: A/1, B/2, the whole circuit will be turned on.
4 way e control switch:
Input voltage: 220V
Output: 1/2/3/4 road
Load power:
Resistive load: the maximum output power of single group within 1000W such as ordinary s, s
Inductive load: the maximum output power of single set within 250W such as lamp ballast: energy-saving lamps, bracket lamps, ceiling lamps
e control distance: about 8-15 meters indoors and more than 20 meters outdoors.
Start-up battery: 12V 23A not included
LED 60W
Switcher distributor size: 11x5.4x2.6cm
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
1 X e Control Receiver
1 X e Control nsmitter
1 X e Control Bracket