1200W 20A 1800W 40A DCDC Boost Converter Step Up Power Supply Module 1060V To 1290V Adjustable Voltage Charger

1800W 40A 1500W 30A 1200W 20A DC-DC Boost Converter Step Up Power Supply Module 10-60V To 12-90V Adjustable Voltage Charger

Product selling point:
1. Using high-quality materials, the quality is guaranteed
2. Fan blade heat dissipation is adopted, the heat dissipation effect is very good, and the output power is higher
3. The temperature-controlled fan adopts hydraulic bearing fan, which has achieved a good balance in noise and heat dissipation. When the load is light, the fan does not turn. When the load temperature reaches about 60 degrees, the fan automatically rotates. Can effectively reduce noise and prolong service life
4. The main power tube insulation board is made of high-quality alumina, and the thermal conductivity is 10 times that of ordinary insulation pads
5. Oversized ferrosilicon aluminum magnetic ring, using four 1.2 pure copper enameled wires, low calorific value and high efficiency
6. With constant current function, it can be used for car battery boost, battery charging, etc.

Parameter:
Working characteristics:
Output power: 1800W
Input voltage range: 10V-60V
Output voltage range: 12V-90V
Input current: 40A
Output current: 22A
Conversion efficiency: 48V to 60V 8A (98.1 %)
48V to 72V 8A (98.1%)
48V 84V 8A (97.6%)
Charge Regulation: 10% to 50% charge (72V output)
Temperature coefficient: 50% load
Ripple and Noise: 20MHz bandwidth (48V-72V 4A) 100mVp-p
Switching frequency: VIN = 48V VO = 72V 4A (110khz)
No-load current: VIN = 48V VO = 72V (18mA)
Input reverse protection: yes
Storage humidity: 95%
Operating temperature: -20 65 °C
Storage temperature: -40 125 °C
Operating Temperature Rise: 48V to 60V 5A (45 °C)
Overheating Protection: 60°C
Wiring method: input, output (solderless, terminal block).
Cooling method: strong air cooling

Module :
Module name: 1200W boost constant current module
Module nature: non isolated boost module (b0ost)
Input voltage: dc10-60v
Input current: 20A (max) (when the input voltage of fan cooling is 12-24V, the input current can reach 25a)
Static working current: 15mA (when 12V rises to 20V, the higher the output voltage, the higher the static current will increase)
Output voltage: 12-83v continuously adjustable (the default output is adjusted to 19v for shipment, please specify if it needs to be adjusted to other voltage values. If there is a multimeter, the buyer can adjust it by himself)
12-83v fixed output (for batch customers)
Output current: 18A Max more than 10A, please strengthen heat dissipation (related to input and output pressure difference, the larger the pressure difference, the smaller the output current)
Constant current range: 0.5-18A (+/-0.3A)
Input anti reverse connection: Yes (150A power MOS anti reverse)
Low battery protection: Yes (9-50v adjustable)
Temperature control fan: Yes (turn on the fan over 55 °)
Operating temperature: -40~+85 ℃ (please strengthen heat dissipation when the ambient temperature is too high)
Operating frequency: 150kHz
Conversion efficiency: 92%-97%