1200W / 1800W 25A DC DC Voltage Converter Boost Adjustable Module DC-DC 10V -60V To 12V-90V Step Up Power Supply Regulator

is_customized : YesModel Number : 1500WOperating Temperature : -40~+85 degreesDissipation Power : 720WSupply Voltage : DC10-60VApplication : Adjustable boost module power supplyCondition : NewType : Voltage RegulatorBrand Name : Snow brocade : Mainland China
Module name: 1800W boost constant current moduleModule nature: non-isolated boost module (BOOST) Input voltage: DC10-60VInput Current:10-30V input voltage, maximum current 30A 31-60V input voltage, maximum current 25AStatic working current: 15mA (when 12V rises to 20V, the higher the output voltage, the static current will increase) Output voltage: 12-90V continuously adjustable (the default output is adjusted to 19V for shipment, if you need to adjust to other voltage values, please specify. If you have a multimeter, the buyer can adjust it yourself)                      12-90V fixed output (for batch customers) Output current: 20A MAX Please strengthen heat dissipation if it exceeds 15A (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)Constant current range: 0.8-20A (+/-0.3A)Input anti-reverse connection: Yes (150A power MOS anti-reverse)Low battery protection: Yes (8-50V adjustable) self-recovery typeWorking temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high)Working frequency: 150KHzConversion efficiency: 92%-97% (Efficiency is related to input, output voltage, current, pressure difference. Small pressure difference, high efficiency)Input overcurrent protection: Yes (input over 35A, automatic protection, power supply does not boost)Short circuit protection: Yes (input 30A fuse) double short circuit protection, safer to use.Input reverse connection protection: Yes (150A power MOS tube is anti-reverse. It can be reversed for a time)Installation method: 4 3mm copper pillarsWiring mode: terminal block (please use high-current pure copper wire)Module size: length 130mm, width 52mm, height 84mm (high including copper pillar and fan), length 130mm, width 52mm, height 67mm (high without copper pillar and fan)Output Power:Input voltage*30A, such as: input 12V*30A=360W, the maximum power when inputting 12V is 360WInput voltage*30A such as: input 24V*30A=720W, that is: the maximum power when inputting 24V is 720WPower description:       Since the maximum input current of this power supply is 30A at 10-30V and 25A at 31-60V, the output power is related to the input voltage. The higher the input voltage, the higher the power,Input voltage * input current is equal to the power of the whole machine. For example, the input 12V*30A power is 360W. The input 24V*30A is 720W. When the input voltage is 36V, the maximum input current is 25A. The maximum power of the power supply is 900W. Module name: 1200W boost constant current moduleModule nature: non-isolated boost module (BOOST)Input voltage: DC10-60V (input 10-60V directly without jumper cap to select voltage)Input current: 20A (MAX) more than 15A, please add fan for heat dissipation (when the input voltage is 12-24V, the input current can reach 25A)Static working current: 15mA (when 12V rises to 20V, the higher the output voltage, the static current will increase)Output voltage: 12-83V continuously adjustable (the default output is adjusted to 19V for shipment, if you need to adjust to other voltage values, please specify. If you have a multimeter, the buyer can adjust it by yourself)               12-83V fixed output (for batch customers) Output current: 18A MAX, please strengthen heat dissipation if it exceeds 10A (related to the input and output pressure difference, the greater the pressure difference, the smaller the output current)Constant current range: 0.5-18A (+/-0.3A)Input anti-reverse connection: Yes (150A power MOS anti-reverse)Low battery protection: Yes (9-50V adjustable)Working temperature: -40~+85 degrees (please strengthen heat dissipation when the ambient temperature is too high)Working frequency: 150KHz Conversion efficiency: 92%-97% (Efficiency is related to input, output voltage, current, pressure difference. Small pressure difference, high efficiency)Input overcurrent protection: Yes (input over 25A, automatic protection, power supply does not boost)Short circuit protection: Yes (input 30A fuse) double short circuit protection, safer to use.Input reverse connection protection: Yes (150A power MOS tube is anti-reverse. It can be reversed for a time) Module size: length 130mm width 52mm height 46mm Output Power:Input voltage*20A, such as: input 12V*20A=240W, the maximum power when inputting 12V is 240W Input voltage *20A such as: input 24V*20A=480W, that is, when input 24V, the maximum power is 480WNote: The maximum power is 240W when the input is 12V, the maximum power is 480W when the input is 24V, and the maximum power is 720W when the input is 36V    voltage regulation:Use a flat-blade screwdriver to adjust the output terminal "V-ADJ" potentiometer (marked in the figure below) when the power supply is switched on and there is no load. Turn clockwise to increase and counterclockwise to decrease). Due to the large capacity of the output capacitor, the output voltage is controlled by The response will be slower when the high voltage is adjusted to the low voltage. The adjustment range of the instrument is smaller. Current regulation:Adjust the "CC A-ADJ" potentiometer counterclockwise for about 30 turns, set the output current to the minimum, connect the LED battery and other loads, and adjust the "CC A-ADJ" potentiometer clockwise to the current you need. For battery charging, after the battery is discharged, connect to the output and adjust CC A-ADJ to the current you need. When charging, you must use the discharged battery to adjust, because the battery is left The more power, the lower the charging current. The default output ESC is shipped to 3A. If we need to adjust the current value adjustment instructions or leave a message. Never use short-circuit output to adjust the current. The circuit structure of the boost module cannot be adjusted by short-circuit. Input low battery protection adjustment:    Low battery protection is mainly aimed at preventing battery over-discharge when the input power is a battery, and the battery voltage is too low to damage the power supply module and battery. Low-voltage protection should also be set when the input is a switching power supply    Method 1: For example, set 12V battery low battery protection. Connect a 10V voltage to the input terminal of the power module and use a flat-blade screwdriver to adjust RV1 (clockwise protection voltage value is increased, counterclockwise protection voltage is decreased) until the UVLO light is on. At this time, the low battery protection voltage is 10V. When the voltage drops to 10V, the power module does not rise (the input voltage is equal to the output voltage), only when the input voltage is higher than 10V, the power supply self-recovers and starts the boost.    Method 2: Connect the input to the battery or switching power supply. If the UVLO light on the board is off, adjust the RV1 potentiometer counterclockwise to turn the UVLO light on, and then turn it clockwise twice. If the UVLO light is on, turn the RV1 potentiometer clockwise to turn off the UVLO light, and then turn it off twice. (Adapt to 8V-45V voltage)