1~10PCS Development Board WiFi+ Ul-Low Power Consumption Dual Core ESP-32S ESP32-WROOM-32D ESP32-WROOM-32U ESP 32

1~10PCS Development Board WiFi+ Ul-Low Power Consumption Dual Core ESP-32S ESP32-WROOM-32D ESP32-WROOM-32U ESP 32

Description:

ESP32-WROOM-32 is a general-purpose -Fi+BT+BLE MCU module with powerful functions and a wide range of uses. It can be used for low-power sensor networks and demanding tasks, such as voice , audio streaming, and MP3 De etc.

The core of this module is the ESP32-D0WDQ6 chip*, which is scalable and adaptive. The two CPU cores can be controlled separately. clock

The frequency adjustment range is from 80 MHz to 240 MHz. The user can cut off the power of the CPU and use the low-power co-proceor to continuously monitor the peripherals

The status change or whether some og quantity exceeds the threshold. ESP32 also integrates a wealth of peripherals, including capacitive touch , Hall ,

Low noise sensor amplifier, SD card interface, Ethernet interface, high-speed SDIO/, UART, and I2C, etc.

The module integrates ditional , low-power and -Fi, and has a wide range of uses: -Fi supports a wide range of communication connections, and also supports

The router is directly connected to the Internet; while allows users to connect to mobile phones or broadcast BLE Beacon to facilitate signal . Sleep of the ESP32 chip

The current is le than 5 µA, ing it suitable for battery-powered wearable electronic devices. The data nsmiion rate supported by the module is up to 150 Mbps, output

The power reaches 20 dBm, which can achieve the widest range of wirele communication. Therefore, this module has industry-leading technical specifications,

Excellent performance in terms of nsmiion distance, power consumption, and network connectivity.

The operating system of ESP32 is freeRTOS with LwIP, and TLS 1.2 with hardware acceleration is built-in. The chip also supports OTA encryption

Upgrade, it is convenient for users to continue to upgrade after the product is released.

Specifications:

Test reliability: HTOL/HTSL/uHAST/TCT/ESD

-Fi protocol: 802.11 b/g/n (802.11n, speed up to 150 Mbps)

A-MPDU and A-MSDU aregation, support 0.4 µs guard interval

Frequency range 2.4 GHz ~ 2.5 GHz

protocol: Compliant with v4.2 BR/EDR and BLE standards

radio: NZIF receiver with -97 dBm sensitivity, Cla-1, Cla-2 and Cla-3 nsmitters, AFH

audio: CVSD and SBC audio

Module interface: SD card, UART, , SDIO, I2C, LED PWM, motor PWM, , IR, counter, GPIO, capacitive touch sensor, ADC, DAC, two-wire automotive interface (TWAI®, compatible with ISO11898- 1)

On-chip sensor: Hall sensor

Integrated f: 4 MB

Working voltage/supply voltage: 3.0 V ~ 3.6 V

Package Included:

1*module