10pcs 433MHZ e Control Car Key Garage Gate Door Opener Controller Duplicator Clone Cloning Code

Description:

Cloning chip types:
2260PT2260,SC2260,LX2260,HX2260; 2262,PT2262,SC2262,LX2262,HS2262,HX2262,PT2264,PT2240LX2240,1527 EV1527,HS1527,HX1527 ,FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different chip manufacturers have different prefixes chip model, as as the dial portion of the chip can be the same model.

Note:
We usually do not recommend copying a rolling code chip, because there are many uncertainties when copying a rolling code chip. When copying a rolling code chip e control, it is not possible to determine whether the e control chip is an chip. Therefore, we do not recommend copying the rolling code e control.

Use steps:

1. Clear code: two fingers at the same time hold the unlokey and lokey; the LED light rapidly fes 3 times in about 2 seconds; let one of the fingers go the other hand cannot let go, and then use the loose finger to quickly clithree times on the loose on until the LED light fes quickly; the two fingers can release; then press any one key of the e control; when LED light goes off, it means clear code is successfulfour keys all empty; if after you press any on of the e control, the light is still on, it indicates that the code has not been cleared successfully. You need to re-clear, and only successfully clearing the code can cloning be successful. You can repeatedly clear and clone the code.

2. Copy: left hand taking the e control, right hand taking our cloned e control and keep two e control as close as possible; press the first keys of two e controls at the same time; in about 2 seconds, the LED light will f quickly 2 times; after one second, the indicator light keeps fing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key code on e control has been copied to the other e control; the same method can be used in turn on the second key, the third key... If the copy is successful, the e control function is the same as the matching e control.

3. Restore: When you accidentally clear the copy of the e control code, you can simultaneously press the copy of the e control of the bottom two keys, LED lights will f quickly, let go after pressing any key, light long, this Indicating that the code for the e control is restored. Before using our copy e control, please be sure to remove the existing code from the e control.

4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:

1 first clear code;

2 after clearing code, copy the unsuccessful key again, and there is no need to copy the rest ons;

3 and then clear the code again;

4 restore code; at this time, the keys that were not successfully copied are now covered by new codes, and the keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied.

Precautions:

1. Select the e control of the prerequisite: the e control function is normal, e control chip is the same or compatible, e control operating frequency the same.

2. The e control can only copy the fixed code, learn the code chip and part of the single-chip e control can copy the chip model see copyable chip type.

3. Two-way e control, rolling code e control, single-chip program e control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.

4. Before copying the e control, e sure that the existing code on the e control has been cleared and chethat the code is cleared successfully. Otherwise, it cannot be copied.

5. Please ensure that your e control has enough power, the distance between the two e control the better! If the copy distance is too close to the switch at different angles to copy. Press and hold the on on the e control to send the signal completely normal, and then press the on on the e control to ensure that the function is completely copied.

Specifications:
Material: Plastic.
Size: 60*36*12mm.
Color: s show.
Type: Wireless e.
For: Such as electric telescopic door e control, road gate e control, alarm e control and so on.
Rated voltage: 12V Batteryincluded.
Wireless nsmission distance: 50-150 m. open space

Package Included:
10 * 433MHZ e control Icaning battery included