10PCS 433MHZ Copy Remote Control Car 4 Garage Gate By Opener RF Remote Control Duplicator Cloning Car Key

:

Cloning types:
2260(PT2260,SC2260,LX2260,HX2260); 2262,(PT2262,SC2262,LX2262,HS2262,HX2262),PT2264,PT2240(LX2240),1527( EV1527,HS1527,HX1527 ),FP527,CS5211,SMC918,SMC926,AX5026,AX5326-3,AX5326-4,HT600,HT680,HT6207,HT6010,HT6012,HT6013,HT6014,HT12D, HT46F49E, PIC16F629,PIC16F630 and so on. Different manufacturers have different prefixes model, as as the digital portion of the can be the same model.

Note:
We usually do not recommend copying a rolling , because there are many uncertainties when copying a rolling . When copying a rolling remote control, it is not possible to determine whether the remote control is an encryption . Therefore, we do not recommend copying the rolling remote control.

Use steps:

1. Clear : two fingers at the same time hold the unlock key and lock key; the LED light rapidly fes 3 times in about 2 seconds; let one of the fingers go (the other hand cannot let go), and then use the loose finger to quickly click three times on the loose button until the LED light fes quickly; the two fingers can release; then press any one key of the remote control; when LED light goes off, it means clear is successful(four keys all empty); if after you press any button of the remote control, the light is still on, it indicates that the has not been cleared successfully. You need to re-clear, and only successfully clearing the can cloning be successful. You can repeatedly clear and clone the .

2. Copy: left hand taking the remote control, right hand taking our cloned remote control and keep two remote control as close as possible; press the first keys of two remote controls at the same time; in about 2 seconds, the LED light will f quickly 2 times; after one second, the indicator light keeps fing and let go of your fingers; and then press the key after successful study, the light keeps on, which means that the first key on remote control has been copied to the other remote control; the same method can be used in turn on the second key, the third key... If the copy is successful, the remote control function is the same as the matching remote control.

3. Restore: When you accidentally clear the copy of the remote control , you can simultaneously press the copy of the remote control of the bottom two keys, LED lights will f quickly, let go after pressing any key, light , this Indicating that the for the remote control is restored. Before using our copy remote control, please be sure to remove the existing from the remote control.

4. How to deal with the situation where some of the keys can control, the rest cannot control? You can use clear and restore operation, the specific operation is as follows:

(1) first clear ;

(2) after clearing , copy the unsuccessful key again, and there is no need to copy the rest buttons;

(3) and then clear the again;

(4) restore ; at this time, the keys that were not successfully copied are now covered new s, and the keys that were successfully copied are now retained. If there is no copy after the second copy of the keys, repeat the above steps again and again until all keys are successfully copied.

Precautions:

1. Select the remote control of the prerequisite: the remote control function is normal, remote control is the same or compatible, remote control operating frequency the same.

2. The remote control can only copy the fixed , learn the and part of the single- remote control (can copy the model see copyable type).

3. Two-way remote control, rolling remote control, single- encryption program remote control cannot be copied. Such as HCS200, HCS201, HCS300, HCS301 and so on.

4. Before copying the remote control, make sure that the existing on the remote control has been cleared and check that the is cleared successfully. Otherwise, it cannot be copied.

5. Please ensure that your remote control has enough power, the distance between the two remote control the better! If the copy distance is too close to the switch at different angles to copy. Press and hold the button on the remote control to send the signal completely normal, and then press the button on the remote control to ensure that the function is completely copied.

Specifications:
Material: Plastic.
Size: 60*36*12mm.
Color: As pictures show.
Type: Wireless remote.
For: Such as electric telescopic door remote control, road gate remote control, alarm remote control and so on.
Rated voltage: 12V Battery(included).
Wireless transmission distance: 50-150 (m). (open space)

Package Included:
10 * 433MHZ remote control Icaning (battery included)

There could be some deviations due to manual measurement or slight color difference owing to photographing condition. Thank you for your understanding. If you do not understand what you can contact customer service at any time, I wish you a happy shopping.