10A LCD Display Digital Temperature Controller Regulator Thermocouple Thermostat Sensor 12V 24V With NTC-10K B3950 Probe cable

1.Descrtion:

It is a digital temperature controller module.LCD display, very clear, easy to use, powerful.It can be widely used at Smart home,Industrial control,Automatic irrigation,Indoor ventilation.Protection equment.

2.Features:

1>.LCD display;

2>.Power-down memory function;

3>.Emergency stop function;

4>.Real-time display temperature;

5>.Automatically save parameters;

6>.Support UART Set;

7>.Support Heating and Cooling work mode;

8>.High temperature alarm;

9>.Work status indicator;

10>.Independent of parameters;

11>.With case, beautiful and practical;

12>.High precision;

13>.Multle parameters are displayed simultaneously.

3.Parameters:

1>.Product Name:Digital Temperature Controller

2>.Product Number:XY-WT01

3>.Working Voltage:DC 6V-30V

4>.Control Load Current:10A(Max)

5>.LCD refresh rate:0.5 second

6>.Temperature Sensor:NTC-10K B3950

7>.Test temperature: -50~110℃

8>.Control precision:0.1℃

9>.Sensor length: 0.5 meter

10>.Sensor probe specifications:4*30mm Stainle steel

11>.Physical dimension:79*44*26mm

12>.Operating Humidity:5%~95%RH

4.Work Mode:

1>.’ H ’: Heating mode.

Relay will turn ON and the heating device starts to work when Current Temperature Value is le than Setting Temperature Value - Return Temperature Value.

Relay will turn OFF and the heating device stops to work when Current Temperature Value is more than Setting Temperature Value.

2>.’ C ’: Cooling mode.

Relay will turn ON and the cooling device starts to work when Current Temperature Value is more than Setting Temperature Value + Return Temperature Value.

Relay will turn OFF and the cooling device stops to work when Current Temperature Value is le than Setting Temperature Value.

3>.’ OPH ’: ON/OFF delayed start.

The system starts timing 'T' when a normal heating or cooling operation is completed.The system will begin the next round of heating or cooling only after 'T'>'OPH'.

4>.’ OFE ’: Temperature correction function(-10.0~10.0℃).

If the module works for a long time, there may be deviations. Corrected by this function.

Actual Temperature Value = Current Temperature Value + Calibration Value.

5>.’ ALA ’: Set high temperature alarm.

Module will turn on the sound and light alarm and relay will OFF at the same time when Current Temperature Value is more than Set Alarm Temperature Value.Any on to stop the sound and light alarm.

5.Additional Features:

1>. Set or read data by UART.

The parameters such as start temperature, stop temperature, temperature correction, etc. can be set through the UART.

2>.Temperature real-time reporting.

The module transmits the detected temperature to the terminal through the UART at intervals of 1 s to facilitate data acquisition if the temperature reporting function is turned on.

3>.Relay enable (default on).

If the relay enable is turned off, the relay remains off.

That is, the output state will never change, no matter what the measured temperature is.

4>.Reset.

Pre on ‘STOP’ and ‘SET’ for more than 3second at the same time to restore the factory settings.

6.Set Parameter :

Long pre:keep pre on for more than 3second.

1>.Set Working mode/Setting temperature/Return Temperature Value

1.1>.Short pre on 'SET' and enter the quick setting interface;

1.2>.Switch the parameters that need to be set for Working mode/Setting temperature/Return Temperature Value by short pre on 'SET'.

1.3>.Modify the parameter value by on 'UP' or 'DOWN' after select parameter.Support short pre/long pre;

1.4>.Exit the quick setting interface and save the parameters by long pre on 'SET' for 3second or continue 6S without any on operation.

NOTE:The Return Temperature Value display in the first line where the Current Temperature Value display position.

The Setting Temperature Value display in the second line after ‘H’ or ‘C’.

2>.Set OPH/OFE/ALA

2.1>.Long pre on 'SET' and enter the parameter setting interface.

2.2>.Switch the parameters that need to be set for OPH/OFE/ALA by short pre on 'SET'.

2.3>.Modify the parameter value by on 'UP' or 'DOWN' after select parameter.Support short pre/long pre;

2.4>.Exit the parameter setting interface and save the parameters by long pre on 'SET' for 3second or continue 6S without any on operation.

2.5>How to turn on the high temperature alarm ‘ALA’ (default off).Select ‘ALA’ interface,short pre on ‘STOP’ to ON or OFF ‘ALA’.Set high temperature value by on ‘UP’ or ‘DOWN’ if turn ON ‘ALA’.If the high temperature alarm function is turned OFF, ‘ALA’ displays ‘----’ as a reminder.LCD will display ‘W’ if turn ON ‘ALA’.

2.6>.How to enable delayed start ‘ OPH ’(default off).Select ‘ OPH ’ interface,short pre on ‘STOP’ to ON or OFF ‘ OPH ’.Set delay time value by on ‘UP’ or ‘DOWN’ if turn ON ‘ OPH ’.If the delayed star function is turned OFF, ‘ OPH ’ displays ‘----’ as a reminder.LCD will display ‘h’ in last line and last bit if turn ON delayed start.

7.Use steps:

1>.Connect NTC sensor to Digital Temperature Controller;

2>.Connect voltage to module;

3>.Set parameters;

4>.Remove input voltage;

5>.Connect to load;

6>.Connect voltage to module;

8.UART communication and parameter settings

The system supports UART data upload and parameter setting functions (TTL level);

UART: 9600, 8, 1

9.Application:

1>.Smart home

2>.Industrial control

3>.Automatic irrigation

4>.Indoor ventilation

5>.Self-made thermostatic control box

6>.Equment cabinet

7>.Air conditioning system

8>.Temperature control protection

9>.Refrigerator

10>.Freezer

11>.Water heater

12>.Hosts

13>.Hatch control

10.Note:

It is a relay output mode and cannot be used as a power module. It cannot output voltage. The load needs to be connected to a separate power supply.

11.Package:

1>.1pcs XY-WT01 Digital Temperature Controller;

2>.1pcs 0.5meter NTC-10K B3950 sensor;

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.