10A 20A 30A 40A 60A 80A MPPT PWM Solar Charge Controller 12V 24V Dual USB Solar Regulator With Big LCD Battery Solar Controllers

Description:
MPPT 10A / 20A / 30A solar controllers are used in solar photovoltaic systto coordinate solar panels,
batteries and loads. It is a very ant component in photovoltaic systems. It is different from other
solar controllers in that it adds comprehensive protection functions to enable entire solar
photovoltaic system to operate efficiently and safely.MPPT 10A / 20A / 30A solar controller can
automatically adjust working voltage of the solar panel, so that the solar panel will work consistently
at the maximum power point of the V-A characteristic curve throughout the day. Compared with
solar controllers, it has a temperature compensation function, which can improve the working efficiency
of photovoltaic modules by 30%, and can significantly extend the battery life.
MPPT 10A:
MPPT 10A Solar Panel Charge Controller Regulator Solar Panel 130W / 12V 260W / 24V
Compatible with 260W (24v) solar panel, with dark activation function, maximum current is 10A timer
projection (lighting function)
Compared with solar charging controller, this MPPT controller can improve efficiency by 10%
-30%
Solar LCD series is an intelligent, multifunctional solar charge and discharge controller
1. LCD display
2. Simple operation interface
3. MPPT + PWM charging mode (the controller provides MPPT maximum power point tracking function,
and the charging mode is PWM)
4. Parameter user can reset
5, one click to open and close the load
6, the key to restore factory settings
7, battery reverse discharge protection
8, battery reverse polarity protection
9, battery undervoltage protection
10, overload, short circuit protection
11, automatic temperature compensation function
12, can charge and discharge at the same time, always keep the battery fully charged
13, the mobile phone USB 5V charging (1500mA). (Only MPPT 30A with USB)

Specifications:
Parameters / model ： MPPT10

Maximum current power ： 10A

Installation Lin (mm2) ： 4mm2

Installation line (AWG) ： 10 (AWG)

Weight ： 280g

Dimensions ： 143 × 89 × 46 (mm)

Load loss system ： ≤13mA

Loop Buck ： ≤100mV

Charging mode ： MPPT + PWM mode

Operating temperature ： -10 degrees Celsius ~ 60 degrees Celsius

Storage temperature ： -30 degrees Celsius ~ 70 degrees Celsius

Moisture requirements ： ≤90% non-condensing

Temperature compensation ： -4mV / cellular / degrees Celsius

Temperature probe (integrated components) ： NTC 100 K thermistats

Standard battery voltage ： 12V 12V

Battery capacity ： ≥100AH

Package Included:
1 * MPPT Solar Controller

1 * User manual

1 * Temperature sensor



About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.