1014D Digital Oscilloscope Dual Input Signal Osiloscopio Digital 1GSa/s Sampling Rate 1GB Storage

FNIRSI-1014D

FNIRSI-1014D is a two in one oscilloscope and signal , the real-time sampling rate is 1GSa / s and with 100MHz* 2 ana-log bandwidth, with 7inch TFT LCD display screen, the built-in high-voltage pro-tection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope ing accident caused by the probe not moving to 10x gear, built in DDS function signal and the industry's ori-ginal chopping output (@ 2.5vpp), all signal frequency step is 1Hz, support 14 kinds of standard function signal and a customizable chopping signal, chopping The output device intercepts part or the whole part of the complex signals measured by the oscilloscope as the output signal of the signal , which can store up to 1000 customized cut-off signals. Come on and try it, it will not let you down.Features:Built in DDS signal , support 12 kinds of function signal.Capture output signal function, which can store up to 1000 capture signals.Targeted high intelligent decoding algorithm, the encoderlife is infinite, and intelligent anti- function, 1X Can withstand up to 400V withstand voltage.With 100MHz * 2 ana-log bandwidth and @ 1GSa/s sampling rate（1X = 5MHz, 10X = 100MHz).Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast.High measurement voltage range: 1X can measure 0~40 V, 10X can measure 0~400V.Up to 12 s measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period.Cursor measurement function: it is convenient to manually measure the period and frequency and voltage.Complete triggering function (single, normal, automatic), and at any time, the waveform display (pause function) is fro-zen.Equipped with high efficiency One-button AUTO, and one-button waveform storage and screenshot function.Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.Equipped with a USB interface, which can be connected to a com-puter to share its screenshots with the com-puter, which is convenient for secondary analysis.Liajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.FFT display function, can analyze the spectral characteristics of the signal, memory technology, waveform refresh screen does not flicker.With the screen brightne adjustment function and background gr-id brightne adjustment function, also easy to carry.Specifications:Material: ABSAna-log band width: 100MHz * 2Number of s: 2 sMaximum real time sampling rate: 1GSa/sVertical sensitivity: mV/div ~ 0 V/divHorizontal time base range: S/div ~ 10nS/divMaximum test voltage: 40 V (1X probe), 400 V (10X probe)Storage depth: 240KbitInput resistance: 1MΩADC precision: 8bitsCoupling mode: AC/Direct CurrentTrigger mode: Single, Normal, AutoTrigger edge: Rising edge/Falling edgeExternal trigger voltage 0~40 VExtension ports: USB picture exportPackage size: 340 * 140 * 70mm / 13.4 * 5.5 * 2.8inPackage weight: 1949g / 4.3lbPacking list:1 * FNIRSI-1014D Oscilloscope Host2 * Matching 100MHz Probe (1X and 10X）1 * Clip1 * USB Data Line1 * English User Manual

TYPE 2

Features:2 In 1 Function:This product ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one.This product is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordle components, and preliminary screening of small batch components.The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth.With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analogs signals and aperiodic digital signals.Up to ±400V voltage signal can be measured, has a wide applications.Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.S-contained 80kHz /5.0V PWM waves test signal source with adjustable duty cycle.This instrument can automatically identify and measure various transistors. Including NPN  transistors, N- and P- field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc.,and paive component such as resistors, inductors, capacitors, etcAutomatic of pin definitions.Specifications:Material: ABSType: without adapter, with adapter(optional)Display: 2.4inch color screen with backlightBattery: 1 * lithium battery, 10mAh(included)Recharging: USB Type-C, 5VPackage size: 140 * 125 * 55mm / 5.5 * 4.9 * 2.2inPackage weight:Without adapter: 296.6g / 10.5ounceWith adapter: 345.6g / 12.2ounceOscilloscope Specifications:Real-tim sample rate: 2.5MS/sAnolog bandwidth: 0-200kHzInput resistance: 1MΩCoupling: AC/Direct currentTest voltage ranges:1:1 probe: 80Vpp (±40V)10:1 probe: 800Vpp (±400V)Vertical sensitivity: 10mV/Div~10V/Div(in 1-2-5 increments)Vertical dispment: adjustable, with indicationHorizontal time base ranges: 10us/Div~0s/Div (in 1-2-5 increments)Trigger mode: automatic, regular, singleTigger type: rising edge. falling edgeTrigger level: adjustable, with indicationWaveform freeze: yes (HOLD function)Automatic measurement: maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cyclePWM output: FRQ: 0~80KHz, duty cycle: 0~100%, amplitude: 5.0VElectronic Component Tester Specifications:Capacitance measuring ranges: 25pF~100mF(capacitance value, lo factor Vlo)Resistance measuring ranges: 0.01Ω~MΩInductance measuring ranges: 10uH~1000uHBattery measuring ranges: 0.1~4.5VInput voltage: 0~16VPWM output: 1.5KHz~9.99MHzWithout Adapter Packing list:1 * Tester1 * Type-C Cable3 * Test Hook1 * ProbeWith Adapter Packing list:1 * Tester1 * Adapter1 * P6100 High Voltage Probe1 * Type-C Cable3 * Test Hook1 * Probe

Features:Intelligent anti-, 1X can withstand up to 400V withstand voltage.100MHz analog bandwidth @ 1GSa/s sampling rate（1X = 5MHz，10X = 100MHz）.Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast.Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation.High measurement voltage range, 1X can measure 0~40V, 10X can measure 0~400V，100X can measure 0~4000V.Up to 12 s measurement：VPP, VP, Vmax, Vmin, Vavg, Vrms, Frequent, Duty+, Duty-, Time+, Time-, Period.Cursor measurement function, it is convenient to manually measure the period and frequency and voltage.Complete triggering function (single, normal, automatic).At any time, the waveform display (pause function) is frozen.Equipped with high efficiency One-button AUTO.One-button waveform storage and screenshot.Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis.Liajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.FFT display function, can analyze the spectral characteristics of the signal.Built in 6000mAh rechargeable lithium battery, fully charged for 4 hours of continuous use at the highest screen brightne.Memory technology, waveform refresh screen does not flicker.Screen brightne adjustment.Background grid brightne adjustment.Ultra thin, easy to carry.Specifications:Material: ABSColor: black+whiteAnalog band width: 100MHz * 2Number of s: 2 sMaximum real time sampling rate: 1GSa/sVertical sensitivity: mV/div~0 V/divHorizontal time base range: S/div~10nS/divMaximum test voltage: 40V (1X probe), 400V (10X probe)Storage depth: 240KbitInput resistance: 1MADC accuracy: 8bitsCoupling mode: AC/DCTrigger mode: Single, Normal, AutoTrigger edge: Rising edge/Falling edgeExternal trigger voltage: 0~40 VDisplay: 7 inch - 800*480Operating: Capacitive touching screen + gestureExtension ports: USB picture exportPower supply: 1 * lithium battery, 6000mAh (included)Item size: 184 * 124 * mm / 7.2 * 4.9 * 2.0inPackage size: 230 * 1 * 60mm / 9.1 * 5.9 * 2.4inPackage weight: 1000g / 2.2lbPacking List:1 * 1013D Oscilloscope Host2 * Matching 100MHz Probe (1X and 10X)1 * USB Data Line1 * User Manual (English)

Many Questions about Dropshipping Services Are As Follows:

1.How many orders can you handle per day?we are a large company in Shenzhen,China,with a large warehouse that can handle large orders everyday.We send out countle parcels everyday.We can guarantee the order you request.

2.How fast can you proce orders?We will arrange shipment as soon as poible after you pay the order.Priority delivery for dropshipping order

3.Could you ship order without any receipts,invoices and promotional offer inside the package?Absolutely!No invoices,receipts,promotional offer if you leave notes on the order(if you want,we can provide.)

4.If you need other products?We can provide most products you need as much as poible1

If you have any other questions,please feel free to contact us.We are very grateful to cooperate with you.

5.We can support CSV/Excel File Dropshipping.

6.There is no limited stock to fulfill the orders on a daily basi