1014D Digital Oscilloscope 100MHz* 2 Ana-log Bandwidth 1GSa/s Sampling Rate Dual Input Signal

1014D:

1014D is a two in one oscilloscope and signal launched by FNIRSI. It has comprehensive functions and high practicability. It is a cost-effective dual desktop oscilloscope for the maintenance industry and R & D industry. The oscilloscope has a real-time sampling rate of 1GSa / s and 100MHz* 2 analog bandwidth; complete trigger function (single time / normal / automatic), both for periodic analog signal and aperiodic digital signal can be used freely; built in DDS function signal and the industry's chopping output (@ 2.5vpp), all signal frequency step is 1Hz, support 14 kinds of standard function signal and a customizable chopping signal, chopping The output device intercepts part or the whole part of the complex signals measured by the oscilloscope as the output signal of the signal , which can store up to 1000 customized cut-off signals; the built-in high-voltage protection module can tolerate up to 400V continuous voltage, without worrying about the oscilloscope ing accident caused by the probe not moving to 10x gear. Large time base scrolling mode, which can monitor slow level changes; equipped with efficient one button auto, which can display the measured waveform without tedious adjustment; display high-definition LCD with 7-inch 800 * 480 resolution; cursor measurement function, when manually reading amplitude and frequency s, it does not need to read the background scale unit and quantity, and it does not need to convert to directly get peak to peak and frequency Extremely convenient screen capture and waveform storage function, built-in 1GB storage space, can store up to 1000 screen capture pictures + 1000 groups of waveform data, the storage proce is simple and fast, save the current waveform with only one click, no cumbersome prompts and choices to save the current data, very convenient; powerful waveform image manager, support thumbnail browsing, view, view details The functions of page turning, deleting and waveform enlarging, reducing and moving are convenient for secondary analysis. The fuselage is equipped with USB interface, which can be connected with the computer to reze the sharing of its own screen capture pictures and the computer, which is convenient for secondary analysis; Li Shayu's graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals; FFT viewing function can estimate the harmonic component of signals; Li Shayu's graphic display function can be used to compare and judge the amplitude, frequency and phase of two groups of signals;

:

1：Built in DDS signal , support 12 kinds of function signal

2：Industry's 【Capture output signal】 function，can store up to 1000 capture signal

3：Targeted high intelligent decoding algorithm, the encoder life is infinite

4：Intelligent anti-，1X Can withstand up to 400V withstand voltage

5：100MHz analog bandwidth @ 1GSa/s sampling rate（1X = 5MHz，10X = 100MHz）

6：Fully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast

7：High measurement voltage range, 1X can measure 0 ~ 40 V, 10X can measure 0 ~ 400V，100X can measure 0 ~ 4000V

8：Up to 12 s measurement：VPP，VP，Vmax，Vmin，Vavg，Vrms，Frequent，Duty+，Duty-，Time+，Time-，Period

9：Cursor measurement function, it is convenient to manually measure the period and frequency and voltage

10：Complete triggering function (single, normal, automatic)

11：At any time, the waveform display (pause function) is frozen

12：Equipped with high efficiency One-button AUTO

13：One-button waveform storage and screenshot

14：Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data

15：Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.

16：Equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysi

17：Liajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signal

18：FFT display function, can analyze the spectral characteristics of the signal

19：Memory compreion technology, waveform refresh screen does not flicker

20：Screen brightne adjustment

21：Background grid brightne adjustment

22：Ultra thin, easy to carry

Specifications:

Material: ABS

Ana-log band width: 100MHz * 2

Number of s: 2

Maximum real time sampling rate: 1GSa/

Vertical sensitivity: mV/p>

Horizontal time base range: S/p>

Maximum test voltage: 40 V (1X probe), 400 V (10X probe)

Storage depth: 240Kbit

Input resistance: 1MΩ

ADC precision: 8bit

Coupling mode: AC/Direct Current

Trigger mode: Single, Normal, Auto

Trigger edge: Rising edge/Falling edge

External trigger voltage 0~40 V

Extension ports: USB picture export

Package size: 340 * 140 * 70mm / 13.4 * 5.5 * 2.8in

Package weight: 1949g / 4.3lb

FNIRSI DSO-TC2:

FNIRSI-TC2 Product Manual:

https://www.mediafire.com/file/ppeajlhbdm1szo4/FNIRSI-1014D+Product+Manual.pdf/file

Introduction：

FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one.Equipped with large-size color dot matrix TFT display.Built-in rechargeable lithium battery.Bring more practical functions to users with a small size,Also has good portability.

FNIRSI-TC2 has various working modes such as oscilloscope and component tester.Each time you click the power button, it will enter the mode selection interface.Pre the [Up] and [Down] keys of the direction keys to select,Select “Mos Test” item, pre【OK】key to enter component tester mode;Select the “Oscilloscope” item, pre【OK】key to enter the oscilloscope mode.

"Mos Test" mode can test various types of transistors, and can identify device type, pin polarity, hFE, turn-on voltage, junction capacitance; can test capacitance, resistance, inductance components, etc.

FNIRSI-TC2 is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordle components, and preliminary screening of small batch components."Oscilloscope" mode to test the signal waveform of the circuit.Support online operation with computer, you can refresh the official firmware by yours and complete the upgrade.

It is hoped that FNIRSI-TC2 can make the study and work of the majority of users more efficient and interesting.

This product ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one. Equipped with large-size color dot matrix TFT display. Built-in rechargeable lithium battery. Bring more practical functions to users with a small size. If you are interested in this product, come and have a try, it will not let you down.Features:2 In 1 Function:This product ingeniously integrates digital oscilloscope, electronic component tester, PWM signal and other functions into one.This product is especially suitable for fast pairing of transistors, identification of mixed surface mount and wordle components, and preliminary screening of small batch components.The oscilloscope has a real-time sampling rate of 2.5MS/s and a 200kHz bandwidth.With complete trigger function (Single, Normal, Automatic), it can be used freely for both periodic analogs signals and aperiodic digital signals.Up to ±400V voltage signal can be measured, has a wide applications.Equipped with efficient one-key AUTO, the measured waveform can be displayed without cumbersome adjustment.S-contained 80kHz /5.0V PWM waves test signal source with adjustable duty cycle.This instrument can automatically identify and measure various transistors. Including NPN transistors, N- and P- field effect transistors, junction field effect transistors, diodes, double diodes, thyristors, etc.,and paive component such as resistors, inductors, capacitors, etcAutomatic of pin definitions.Specifications:Material: ABSType: without adapter, with adapter(optional)Display: 2.4inch color screen with backlightBattery: 1 * lithium battery, 10mAh(included)Recharging: USB Type-C, 5VPackage size: 140 * 125 * 55mm / 5.5 * 4.9 * 2.2inPackage weight:Without adapter: 296.6g / 10.5ounceWith adapter: 345.6g / 12.2ounceOscilloscope Specifications:Real-tim sample rate: 2.5MS/sAnolog bandwidth: 0-200kHzInput resistance: 1MΩCoupling: AC/Direct currentTest voltage ranges:1:1 probe: 80Vpp (±40V)10:1 probe: 800Vpp (±400V)Vertical sensitivity: 10mV/Div~10V/Div(in 1-2-5 increments)Vertical dispment: adjustable, with indicationHorizontal time base ranges: 10us/Div~0s/Div (in 1-2-5 increments)Trigger mode: automatic, regular, singleTigger type: rising edge. falling edgeTrigger level: adjustable, with indicationWaveform freeze: yes (HOLD function)Automatic measurement: maximum, minimum, average, rms, peak-to-peak, frequency, period, duty cyclePWM output: FRQ: 0~80KHz, duty cycle: 0~100%, amplitude: 5.0VElectronic Component Tester Specifications:Capacitance measuring ranges: 25pF~100mF(capacitance value, lo factor Vlo)Resistance measuring ranges: 0.01Ω~MΩInductance measuring ranges: 10uH~1000uHBattery measuring ranges: 0.1~4.5VInput voltage: 0~16VPWM output: 1.5KHz~9.99MHzWithout Adapter Packing list:1 * Tester1 * Type-C Cable3 * Test Hook1 * ProbeWith Adapter Packing list:1 * Tester1 * Adapter1 * P6100 High Voltage Probe1 * Type-C Cable3 * Test Hook1 * Probe