1 PCS Tiger 911 Auto Telephone Dialer Alarm System

(1 PCS) Tiger 911 Auto telephone Dialer Alarm system acceories Calling Transfer Tool Fixed Terminal put in NC NO or voltage

Note :This Dilaer just suitable for PSTN / Program-controlled telephone network cable / DTMF dialing. Not Compatible to the Fibel Optical Telephone wire

Features:

Working voltage: DC11V TO 15 v

Static electricity: 20 ma (at DC12V)

Dialing method: audio/pulse, J1 jumper selection

Alarm: N.C., N.O. and voltage signal jumper J2, J3

The recording time: 20 seconds, ar power off the phone number, voice is not lost

Phone store telephone number: 4 group, each group may be deposited in the longest 16 digits

Secondary private paword: 0-6 private paword, remove top three available alarm, as a whole (6) code is used to change the Settings

The factory paword: 911 Or 0911

(1) the speaker

(2) the microphone

(3) 7 segment display: to store the number of input, will show the number at the same time

(4) the E4 light: set the E4 number, this goes on

(5) E1 indicator light: setting E1 telephone or mobile phone number, this goes on

( 6) E2 status of E2 telephone or mobile phone number, lamp goes on

(7) E3 indicator light: setting E3 telephone or mobile phone number, this goes on

(13) P on can be for the following purposes:

Can store 6 digit number as a paword

When used in automatic return system voice switchboard, can be used as the pause,1 time is stand for 2 sec, 2 times is stand for 4 sec and so on

NC/NO suitable for: Panic on.PIR Motion detector.Smoke Detector.Gas Detector or anything output NC/NO signal

Voltage suitable for:Alarm system Bell port

Microcomputer automatic machine for help AUTO - DIALER operating

Ar startup self-check first:

Ar self-testing enter the working state, seven segment display of the lower right corner point, if has the information, received the alarm signal the Dialer will alarm, if you want setting or edit setting, do like these steps

To set . view phone number . paword and record

1.    Start to programming

First pre P then enter personal paword (0 to 6) then pre Enter

Note: the factory out code is 911

For example: the new machine does not change the paword when the state of programming operation is as follows:

P 9 1 1 Enter

If paword input the correct display O and then into programming status display5

If paword input error display  E, then back to work status, need login a corrected paword

2.    setting the first number:

At the state of programming,(display S),for example, the number is 9353399, so like this

E1  9  3  5  3  3  9  9  ENTER

Type in the ENTER of time store number, if it display O, It mean number have been storage

And then returns to S state, if it is display E, said failed to correct,

Machine will return S state, the user can operate again, if you want to remove the first number, When display S you pre E1,and then pre ENTER

If the dialer will first call telephone switchboard, Do not need switchboard operator,and then auto call extension telephone, such as the extension number is 12,do as below:

E1 9 3 5 3 3 3 9 9 P 1 2 ENTER

Each time you pre the P, meaning pause 2 seconds, if  twice, meaning pause 4 seconds

(Store 2, 3, 4,number is the same way like number 1)

3.View the number what you have been setted:

In the condition of programming, which showed S state, pre 3, displayed C, mean CHECK, then you want

Query of E1, E2, E3, E4 or PAUSE, began to display number, its operating procedures are as follows:

3 E1 or E2 or E3 or E4 or P display shows the number or paword, when finish shows ,buzzer will”du” rang

Any Question contact me:

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.