0.36 Inch Programmable PLC Controller Display Screen Module D110 D114 PLC Programming Module

Descriptipn:This digital tube display can be connected with the domestic PLC produced PLCs ,which can replace the touch screen and text on small , and has a very high price ratio. . In many projects, it can also replace the development of single- microcomputers, with short development cycle, mature circuit, stable and reliable. You can also use our digital display board to take the board, generation counter, , flexible programming of PLC according to your own place of use to adapt to different requirements, avoiding the general-purpose counters on the market, the is not flexible during use.Work Mode:1. Main mode: On -on, it enters the main mode. In this mode, the upper row of digital tubes displays the value of D110. The lower row of digital tubes displays the value of D114. The button switch controls the closing and opening of the corresponding intermediate relay (M). The indicator light is based on the internal intermediate relay. (M) is closed and opened to control the on and off.2. Input mode: Press the SET button for 3 seconds to enter the mode. In the mode, you can change the value of the data register D200. The above row of digital tubes (double-row digital tube) or the left two-digit digital tube (single-row digital tube) The board is used to display the number of the data register to be changed. Press the upper triangle key (increase) to change it by pressing the triangle key (decrease). When changing, the value read will be in the lower row of digital tubes (double row digital tube) The board or the 4-digit digital tube on the right (the board of the single-row digital tube) is displayed, and the UP button and DOWN can also be used to change the value.After changing the value, press the SET button for 3 seconds to enter the main mode.:1.Relationship between button to PLC internal relay: SET to M170 Triangular button to M171 UP to M172 DOWN to M173PS:When the button is pressed (such as UP), the corresponding PLC internal relay (such as M172) is closed. When the button is released, the corresponding PLC internal relay is disconnected. Note: In the main mode, press the SET button to operate in the same way as the 3 buttons. When the button is pressed for 3 seconds, the M170 is always closed.2. Relationship between indicator light number to PLC internal relay: 0 to M160 1 to M161 2 to M162 3 to M163PS:When the internal intermediate relay is closed (such as M160), the corresponding - indicator will light (such as O), and when the internal intermediate relay is disconnected, the corresponding indicator will be off. When the value of the internal data register D110 is always displayed in the main mode, the number of the data register to be changed displayed when the mode is set3. Relationship between Upper row of digital tubes number to PLC internal relay: 0-999999 to D110 the decimal number to D112 Adjustable number of data memories to D1134. Relationship between lower row of digital tubes number to PLC internal relay: 0-999999 to D114 the decimal number to D116 Adjustable number of data memories to D117Package Included:1 x 0.36 Inch Programming PLC Controller Display Screen Module





a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a