0 -20mA/4 -20mA to 0- 3.3V/0 -5V/0 -10V Current to Voltage Module Voltage Transmitter Signal Converter Module

Descrtion: In the proce of circuit signal transmiion, the voltage signal will weaken with the increase of the transmiion distance, and the current transmiion can avoid the weakening of the signal. The module is used for the end of current signal transmiion, the signal is converted into voltage signal for SCM detection. The current input supports 4-20mA and 0-20mA, and the voltage output supports 0-3.3V 0-5V 0-10V. Highlight: The power supply voltage range is wide, and the output voltage supports multle ranges; Zero and full range can be adjusted automatically; High stability, good linearity, industrial grade; The sampling resistor of current signal adopts high precision color ring resistor, which has high precision, small temperature drift and high power Instruction: 1. The module is connected according to the definition, the supply voltage is 7-36V (if the output is to 10V, the supply voltage must be greater than 12V) 2. After power on, the D2 light should be bright, otherwise please check the line connection. Board with reverse connection protection, reverse connection not burning. 3. When the current input is minimum (0mA or 4mA), adjust the ZERO potentiometer, so that the output of VOUT is minimum (0.0V or other voltage) 4. When the current input is the maximum (20mA), adjust the SPAN potentiometer, so that the VOUT output is the maximum value (3.3V or 5V or 10V, when the input is 4-20mA, the minimum output can be 2.5V). According to your needs, select the corresponding range by jumper cap: 4--20ma:0--2.5V range: J1 1, 2 feet short connection, 3, 4 feet short connection 0--3.3V range: J1 1, 2 feet off, 3, 4 feet off 0--5.0V range: J1 1, 2 feet short connection, 3, 4 feet short connection 0--10.0V range: J1 1, 2 feet short connection, 3, 4 feet off 0--20ma:0--3.3V range: J1 1, 2 feet short connection, 3, 4 feet short connection 0--5.0V range: J1 1, 2 feet short connection, 3, 4 feet short connection 0--10.0V range: J1 1, 2 feet short connection, 3, 4 feet off Package Included: 1 * Current to Voltage 0/4-20mA to 0 -10V Transmitter Module

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.