Fashion Street Light Switch PhotoSwitch AC DC 12V 24V 220V 10A Auto On Off Photocell Sensor Controller Outdoor Lighting

Features:
100% brand new and high quality
To turn on or off the light in day and night without manual operation
Do not install the control unit in a place extremely darker in daytime or a place directly by lighting of turning - ON lamp
Widely used: street light, highway, factories, garden, ports, airports, farm, parks, schools, and other places.
Also can fit into solar lamps and lanterns, or cars, motorcycles, electric cars and other power supply voltage is 24V lamps and lanterns or equipment
Easy to install and Convenient to use

Working principle and structure
The circuit is equipped with a delay circuit, which has the anti-interference ability to prevent accidental lightning or flashlights, cars, and other lights from irradiating the photoelectric head, and falling leaves flying low to temporarily block the light power supply from turning on and off. The street lamp automatic switch is composed of a photoelectric conversion device, that is, a photoelectric sensor integrated block, electronic components, and an executive relay. In the daytime, the light is strong, and the current of the photosensitive element increases, which causes the relay of the integrated circuit to be released, so that the street lamp does not turn on. When it gets dark to a certain extent in the evening, the voltage generated by the photosensitive element is low due to the weakening of the light, and the relay pulls in and turns on the street lamp until the next time. In the morning, the light-enhanced integrated trigger will automatically act again and the street light will go out.
Installation Precautions
Red Black
1. Do not install this device in a particularly dark place during the day or a place directly illuminated by normally closed lights.
2. For automatic switch wiring, connect the black and white wires to the power supply, and the red and white wires to the load.
N red
3. Wiring should be strictly in accordance with this manual. If the connection is wrong, the device will be damaged.

Specification:
Model:AS-10
Input Voltage: DC or AC 12V 24V / AC 220V
Max Load Current: 10A
Size:(approx)5 x 4.2 x3.5cm/1.96"x1.65"x1.37"
Frequency:50-60Hz

Package Include:
1 x AC DC 12V 24V 220V Sensor Switch Auto On Off Photocell Street Light Photoswitch