This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
In stock
Shipped from abroad
Free return within 15 days for all eligible items.Details
xinxinshishang
60%Seller Score
15 Followers
Shipping speed: Very Poor
Quality Score: Excellent
A.Function
1. Electrical parameter measurement function
(voltage, current, active power, energy, frequency, power factor)
2. Overload alarm function (over power alarm threshold, backlight and power flashing to alarm).
3. Power alarm threshold preset function (can set power alarm threshold).
4. The energycan be reset use thekey.
5. Store data when power off.
6. Large-screen LCD
7. Backlight function.
B.Appearance and Keyfunction
I.Display Interface
Display interface is large-screen LCD, it can displaysixparameters at the same time.
II.Display format
1.Power: test range: 0~22000W,Startingmeasure power:0.2W
<10Wdisplay format:1.00~9.99W
<100Wdisplay format:10.0~99.9W
<1000Wdisplay format:100~999W
<10000Wdisplay format:1.00~9.90kW
≥10000Wdisplay format: 10.0~22.0kW
2.Energy: test range: 0~999kWh
<1kWhdisplay format:0~999Wh
<10kWhdisplay format:1.00~9.99kWh
≥10kWhdisplay format: 10~999kWh
3.Voltage: test range: 80~260V
Display format: 80~260V
4.Current: test range: 0~100A,Starting measure current:0.001A
<10Adisplay format:0.000~9.000A
≥10Adisplay format:10.00~99.99A
5.Frequency: test range: 45~65Hz
Display format:45~65Hz
6.Power factor: test range: 0~1PF
Display format:0.00~1.00PF
III. Key
1.Backlight control
Short pre the key to turn on or off the backlight, the backlight has memory function, it can store the on or off state when power off.
2. Reset energy
Step1: Long pre the key for 5 seconds until the energyvalueflash, then release the key.
Step2: Short pre the key again, then the energy value is cleared and exit the reset flashing state.
Step3:Ifthere is no operation on the key within 5 seconds,it means the energy value is not cleared and will exit the reset state.
3. Set power alarm threshold
Step1: Long pre the key until the LCD screen display“SET CLr”, then release the key to enter the setting state
Step2: Power window display the current power alarm value and the last digit begin to flash, then you can short pre to plus 1, when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above.
Step3: After finish the setting, long pre the key over 5 seconds will store automatically and exit, the rangeof active power threshold is 0.0~2.5kW.
C. Precautions
1. This module is suitable for indoor, please do not use outdoor.
2. Applied load should not exceed the rated power.
3. Wiring order can’t be wrong.
D. Specification parameters
1. Working voltage: 80 ~ 260VAC
2. Test voltage: 80 ~ 260VAC
3. Rated power:100A/22000W
4. Operating frequency: 45-65Hz
5. Measurement accuracy: 1.0 grade
E. Wiring diagram
F.dimension diagram(mm)
G. Hole Size(mm)
About shipping
This product has no ratings yet.
Subscribe to our newsletter
and be the first one to know about our amazing deals!