This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeElectronicsHome AudioStereo System ComponentsCD & Tape PlayersCD PlayersDY-AP3015 30W X2 Dual Channel Class D DIY Power Amplifier Mo
GH₵ 62.57
GH₵ 125.1350%
7 units left
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 13.90 to Tema
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 13.90
Ready for pickup between 24 October & 29 October when you order within next 13hrs 8mins
Door Delivery
Delivery Fees GH₵ 25.80
Ready for delivery between 24 October & 29 October when you order within next 13hrs 8mins
Return Policy
Free return within 15 days for all eligible items.Details
Warranty
None
Seller Information
Glittering
80%Seller Score
30 Followers
Seller Performance
Shipping speed: Average
Quality Score: Excellent
Customer Rating: Good
Product details
Precautions for use:
The recommended power supply voltage is DC 8~24V. If it exceeds 26V, the chip will be burned. If it is lower than 8V, there will be noise. When connected to a 4 ohm speaker, the power supply should not 12V, and when connected to an 8 ohm speaker, the power supply should not 24V.
The power supply current is recommended to be more than 2A. The working power of the module exceeds 20W*2, and a heat sink needs to be added. that the input audio signal is 0.5V~1.5V. The speaker cable should not be too long, and that it is suitable within 1 meter.
Pay attention to electrostatic protection. touching the power amplifier board, you need to release the static electricity on your hands to avoid the breakdown of the power amplifier chip by static electricity. The digital power amplifier is more sensitive to static electricity. It is recommended to use a speaker with a rated power of 30W and above to avoid the speaker from being overheated and burned.
Adapter speaker (30W~150W): 4 ohm (8-12V power supply); 8 ohm (8-24V power supply)
Module protection mechanism: power reverse connection protection; short circuit protection; - overheating protection
Product Name: 30W Stereo Digital Power Amplifier Module
Product Model: DY-AP3015
Working voltage: DC: 8~24V
Speaker impedance: 4 ohm~8 ohm
Speaker power: 30~150W
Working mode: Class D (PWM modulation)
Number of channels: Stereo (two channels)
Maximum output power (@1KHz):
18W*2 @12V 4 ohm
10W*2 @12V 8 ohm
15W*2 @16V 8 ohm
20W*2 @20V 8 ohm
30W*2 @24V 8 ohm (requires heat sink)
Product size: 45x10mm
Colour: blue+green
Material: PCB+metal Package Contents:
1 * Amplifier board Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
The recommended power supply voltage is DC 8~24V. If it exceeds 26V, the chip will be burned. If it is lower than 8V, there will be noise. When connected to a 4 ohm speaker, the power supply should not 12V, and when connected to an 8 ohm speaker, the power supply should not 24V.
The power supply current is recommended to be more than 2A. The working power of the module exceeds 20W*2, and a heat sink needs to be added. that the input audio signal is 0.5V~1.5V. The speaker cable should not be too long, and that it is suitable within 1 meter.
Pay attention to electrostatic protection. touching the power amplifier board, you need to release the static electricity on your hands to avoid the breakdown of the power amplifier chip by static electricity. The digital power amplifier is more sensitive to static electricity. It is recommended to use a speaker with a rated power of 30W and above to avoid the speaker from being overheated and burned.
Adapter speaker (30W~150W): 4 ohm (8-12V power supply); 8 ohm (8-24V power supply)
Module protection mechanism: power reverse connection protection; short circuit protection; - overheating protection
Product Name: 30W Stereo Digital Power Amplifier Module
Product Model: DY-AP3015
Working voltage: DC: 8~24V
Speaker impedance: 4 ohm~8 ohm
Speaker power: 30~150W
Working mode: Class D (PWM modulation)
Number of channels: Stereo (two channels)
Maximum output power (@1KHz):
18W*2 @12V 4 ohm
10W*2 @12V 8 ohm
15W*2 @16V 8 ohm
20W*2 @20V 8 ohm
30W*2 @24V 8 ohm (requires heat sink)
Product size: 45x10mm
Colour: blue+green
Material: PCB+metal Package Contents:
1 * Amplifier board Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
- Durable and good quality
- Amplifier board
- DY-AP3015
- Stereo amplifier board
- digital power amplifier board
- DIY Amplifier Module
- The details are as described above
What’s in the box
1 * Amplifier board
Specifications
- SKU: 91954EA2NE6IDNAFAMZ
- Model: Amplifier board
- Production Country: China
- Size (L x W x H cm): 6x1x10
- Weight (kg): 0.0185
- Color: multicolor
- Main Material: PCB+metal
- Warranty Address: None
Verified Customer Feedback
This product has no ratings yet.
915 Generation DY-AP3015 30W X2 Dual Channel Class D DIY Power Amplifier Mo
GH₵ 62.57
GH₵ 125.1350%
Questions about this product?