915 Generation Dust Shroud Kit Dry Cutting Grinding Dust Shroud Dust Cover

Angle Grinding Vacuum Cutting Introduction: Q-168 is equipped with a high bracket and a hoop, with a low bracket and a small throat clamp. Saw blade cutting depth 38mm, install 180 saw blade cutting depth 50mm,
Suitable for angle grinder models: 150, 180, 230(Suitable for installing 150/156/160/180 dry cutting saw blades)
Dust : Polycarbonate
Base plate: 2MM steel plated
Fixed bottom plate: screws
Cutting Tips: Use of Angle Grinding Cutting-- the cover on the right side to cut forward / the cover to pull on the left side to cut back. The dust extraction rate of the connected dust is above 90%
When cutting the saw, put the front end of the cover on the surface of the board and cut it down so that the saw also sucks dust
Colour:As shown
Material:Metal alloy
Size:235*206*57mm
Nozzle: Inside 39 / Out 43
Clamping inner diameter: 41-54MM
Package Contents:
1*Hand Angle Grinder Cutting Dust Shroud (Grinder and vacuum not included)
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.