DIY Spot Welder Set Mini 100200A For 186502665032650 Lithium

Description:

It is portable, stable and reliable with complete tools, you can operate it yourself, suitable for DIY enthusiasts.
According to different configurations, the thickness of nickel pieces can be about 0.1MM-0.15mm.
This circuit with a 12V battery will become an energy storage spot welding machine for welding such as lithium batteries and nickel-chromium batteries.
This spot welder circuit board can be used for welding lithium batteries such as 18650/26650/32650.Battery with large discharge current will directly affect the welding effect.
Recommended Batteries:Lead acid batteries with good performance and low internal resistance (internal resistance less than 10 milliohms, discharge current greater than 100A), 36-45ah, such as new car starting battery; 4000mAh 35C-8000mAh 30C 3S model lithium battery pack; 30-35Ah capacity model 18650 battery pack.

Specification:

Size(Circuit board): Length x Width 12x5cm/4.72x1.97inches
Power supply voltage: 11.5V-14.8V
Working current: 100-200A(Best current :150A, discharge less than 100A, will not work).
Item Weight:130g

Package Includes:

1Piece Circuit board
4Pieces Bronze noses.
4Pieces Screws.
1Piece .
1Piece 1 Meter nickel sheets.
1Piece Capacitor.
2Pieces Welding pens.
2Pieces Input wires.
2Pieces Heat shrinkable tubes

Note:

-Users need to provide their own 12V battery power supply, welding current about 100A~200A, for the common 0.1mm~0.15mm nickel plating sheet welding ease.Please make sure your battery can have more than 100A current, otherwise it will not be able to solder!
- There might be little error of size for manual measurement.
- The colors deviation might differ due to different monitor settings, please kindly understand.