Dent Puller Car Dent Puller Suction Cup Dent Puller Powerful Glass Handle Lifter Suction Cup Lifter For Car Dent Pulling Up Tiles Mirror 3 Pack

【Powerful Car Dent Puller】: Although this product is a easy bump dent puller，but it has many functions it can be used to repair dents（As a car dent puller and repair dents on other objects.） and carry heavy objects (such as glass, ceramic tiles, granite, etc.), and to disassemble/move/support items such as display screens.

【Suction Cup Extractor】: As a tooth extractor for repairing dents without paint, the instructions are as follows: 1. Clean the surface (washable with water) and vacuum the working area; 2. Make sure that the movable handle is in a lowered state, and then fit the suction cup completely Work area, apply a little force to the work area to exhaust the air in the work area; 3. Put away the movable handle, and after confirming that the suction cup is tightly attached, pull up the dent with force.

【Household General Tools】: Dent puller are also household tools. Instructions: 1. Clean the contact surface , use suction cup lay a vacuum in the working area, and use air pressure to achieve effect; 2.Apply force to the suction up ensure that it is fully fitted to the working area ， movable handle shpuld in the lowered state ; 3. Lift the movable handle to lock the suction cup, then you can lift and move heavy object or remove screen; Put down the handle to release the adsorption state.

【Easy Using and Widely application】: As household tool：If you leave the suction cup for more than 20 minutes when extracting heavy objects (the working state of the suction cup is not lifted), please make sure that the suction cup is firmly adsorbed when you use it again！ You can reset the working state of the suction cup.

【Note】: As car dent puller: 1. The sucked area of the sucker should be relatively flat to ensure that the sucked area of the sucker can discharge air smoothly and form a vacuum.2. It is forbidden to use this product when the car paint is cracked or damaged in the recessed area.3. When the recessed area of the vehicle is extremely irregular (the suction cup cannot effectively discharge air), the method of multi-point adsorption and simultaneous pulling can be used.