DC 9-12V VU Level Audio Meter Driver Board DB Level Meter Amplifier IC BA6138 Double-Sided Circuit Board + 2Pcs VU Meter

1. Using professional audio VU driver IC, not the TA7318 we used before, this IC contains square root dynamic compression circuit, logarithmic output characteristics, to avoid the small signal pointer does not move, when the signal is large, the pointer hits the bottom The phenomenon.
2. The IC has a mute function. The mute function pin will get a low level at the moment of power-on, which can avoid the phenomenon of the pointer hitting the bottom at the moment of power-on. In order to comply with the boot habit, the pointer will swing with a small swing.
3. The circuit uses 6-12VDC power supply, using IC BA6138, it will be very convenient to use.
4. The double-sided circuit board is used to ensure the firmness of the crimping terminal, so that the pads of the terminal may not be loose after multiple wiring.
5. Each drive board has been tested and adjusted by our professional test stand to ensure the consistency of quality. The design and layout of the drive board are beautiful and reasonable, and there is no interference and self-excitation. Each board has been tested and adjusted by our professional test stand. There is no special requirement. We input 1W/8 ohm (2.83V), and use the P-55 meter to do the load test.

The pointer swing is 0DB scale. If you have special requirements, you can send a text message to explain. In addition to adjusting the load potentiometer, the swing adjustment can also be considered from the input voltage divider circuit.
The brightness of the backlight can be achieved by adjusting the resistance of R9 and R10. With the electrical parameters of the backlight, it can be easily calculated according to Ohm's law. If you want to help, please text us.
Crimp terminal: The crimping terminal we choose has a moderate height. The most important thing is that the crimping method is very reasonable, which can firmly compress wires of various sizes. In addition, we use a double-sided board, and the pads of the crimping terminals are relatively firm and not easy to loosen.
Circuit board size: The installation size of the circuit board, the outer frame is 67.4MM x 56MM, and the installation size of the screw hole: 57MM x 50.5MM. M3 screws are suitable for the screws.
Colour:green
Material:PC+Metal

Package Contents:
1 x Driver board
2 x VU Meter

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !