Descriptions:
Perfect for energy conversion of the water into electrical energy mechanical equipment.
Directly used to charge small battery, mobile phone, or power supply for LED lights, etc.
Output characteristics: output voltage without the voltage regulator circuit is proportional to the water pressure.
Installation: standard household 1/2 inch water pipe (outer diameter: 20mm, inner diameter: 13mm).
F50-80V: DC 0-80V output, the generator does not have a voltage regulator circuit, the peak voltage reaches 80V,
you can directly 3-12V 10W LED lights, you can directly charge the small battery, the charging peak current is about 220mA,
because when charging The generated electricity is used up in a timely manner, so the voltage will be automatically kept
at about 14V, and maintain a suitable voltage so that all the electricity is used to charge the small battery.
F50-5V: DC 5V regulated output, you can charge your mobile phone or lithium battery with charge management chip.
F50-12V: DC 12V regulated output, can supply power to 12V radio, charge, power LED lights.
Specifications:
Material: plastic+stainless steel
Color: transparent+yellow
Voltage: 5V, 12V, 0-80V
Size: about 88x39x58mm
Output voltage: AC 0-20V
Output current: 0-150MA
Flow range: 3-18L/m
Pressure range: 0.15-0.8MPA
Peak output current: ≥220mA (12V)
Line resistance: 10.5±0.5Ω
Insulation resistance: 10MΩ (DC100 megohmmeter)
Peak pressure of closed outlet: 0.6Mpa
Peak pressure of outlet opening: 1.2Mpa
Starting water pressure: 0.05Mpa
Axial clearance: 0.2-1.0mm
Mechanical noise: ≤55dB
Single generator: around 90g
Package Included:
1pc x generator
Note:
1. Due to the light difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.