Car Body Paintless Dent Repair Tools PDR Puller Hail Removal & Pulling Tabs

Description:
: White
Material: Plastic
Size:
Bridge Puller Length: 22cm
Bridge Puller Height: 4cm
Pulling Tabs Diameter:
3.3cm
3.2cm
2.9cm
2.6cm
2.3cm
Pulling Tabs Height: 6.5cm
Knonking Rod Length: 6.5cm

Application:
Car dent repairing

Feature:
The operation is simple, direct indentation
Free repair paint sag, does not destroy the paint, save money - and quickly.
Surface sheet metal mixer is suitable for automobile, refrigerator, washing machine on the surface of sheet metal.
Suitable for all kinds of metal concave plane from use.

How to use:
1, With a clean wet cloth clean dent part;
2, The hot melt adhesive stick load from behind the hot melt , pull the trigger, let the stick into the , plugged in, make preheating 5 minutes;
3, To find a suitable traction gasket (big dent need to use large traction gasket; (note: drawing the gasket, the greater the greater the tension of the traction);
4, Pull the trigger , with extrusion plastic painted choose traction gasket (gasket four holes should also be hot melt adhesive coated);
5, Rapid will be the hot melt adhesive coated traction pads in the central part of the dent, gently , until the hot melt adhesive curing glued down; (hot melt dry, about 8 minutes, we recommend that you don't let the hot melt adhesive dry time not more than 10 minutes; winter dry time slightly shorter.)
6, The traction force of bridge in the middle of the hole on the cement spacer bar, the sleeve nut knob in traction spacer bar, slowly tighten, until he had dent part to flush with the surrounding surface;
7，Some dents, may need to repeat the above steps several times, to dent repair;
8，Unscrew the nut knob, traction force under the bridge, then remove the traction gaskets, if there is a hot melt adhesive on the body surface, let hand gently tear.


Notice:
1、Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid.
2、Please confirm the size before you bid.













a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a