Description:
: Silver
Material: Aluminium alloy(Hammer), Plastic(Head)
Hammer Size(LxW): 31.2 x 9.2cm
Feature:
According to the size of the dent, choose different head
The top parts made by POM better than plastic ,9 heads,POM (polyformaldehyde) Material is better than nylong
The Hail Hammer is a Dent Hammer with an interchangeable tip for some DENT is which is irregular.
How to use?
1. Clean the dent with a clean wet cloth;
2. Mount the stick into the ,pull the trigger to let theglue stick enter into the , connect thepower source and preheat for 5 minutes;
3. Use a proper drawing gasket. Large dent requires a large drawinggasket. (Note: The larger the drawing gasket is, the larger the drawingforce is);
4. Pull the trigger and apply the drawing gasket with extruded (The 4 holes of gasket should be applied with hot melt );
5. Fast place the drawing gasket with hot melt at the center of dent, press lightly until the cures and adheres (Let the cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt , pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Notice:
1、Please allow 1-3mm error due to manual measurement.Pls make sure you do not mind before you bid.
2、Please confirm the size before you bid.
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a