Features:
1.It can provide a decisive leap for safety in rain and fog road traffic, and effectively prevent the probability of accidents
2.Can attract the attention of pedestrians in a shorter time
3.Ultra-low power consumption, reducing fuel consumption and saving energy
Introduction: The newly developed laser fog lamp installs a red laser transmitter at the rear of the vehicle, which can project a laser beam in the air and on the ground in rainy and foggy weather. It is easier to be found than traditional fog lamps and has stronger penetrating power. Remind the vehicles behind to keep a safe distance. The laser beam is emitted downward at an oblique angle to ensure that it does not directly hit the human eye. When you turn on the fog lights in sunny weather, you can only see a red line projected on the ground, so you don't need to worry about blocking the number plate.
Specification:
Product Name: Automobile Laser Warning Light
Laser power:5w
Light Type:LED
Voltage:12v-24v
Maximum adjustable angle:360 degrees
Applicable models:general purpose
Product color:black
Light color:red
Light pattern:straight line pattern
Material:aluminum alloy,plastic
Size:
Laser lamp head:18mm*25mm
Bracket size:about 22mm*40mm
Weight:18g
Installation instructions:Tear off the double-sided tape,and paste the laser fog lamp on the middle of the rear license plate.Connect the wire to turn on the fog lights, adjust the angle of the fog lights to the ground,and tighten the screws. Main functions:When driving in rainy,foggy and sandstorm weather,it can warn the rear vehicles farther and more effectively to avoid accidents caused by getting too close.It provides more eye-catching vehicle position warning and steering instructions for driving at night,and it is also used as an alignment auxiliary line for beginners when driving back into the garage.
Precautions:
1.Please do not irradiate your eyes when installing.
2.Do not cover the number plate at the installation location.
3.This product is only used on cars and cars with a voltage of 12v-24v.
Notes:
1.The pictures are for reference only.Due to technical limitations of photography and unavoidable differences in monitor settings, the colors shown in the photos may not correspond 100% to the colors of the item itself.
2.All dimensions are measured by hand,there may be a little deviation.
packing list:
1 x LED laser light
1 x stand
1 x Viscose
1 set of screws