Battery Charge/Discharge Controller DC 1V-99V/120V Voltage Monitor Battery Protection Lithium/Lead-Acid Battery Tester DC 8V-86V

Battery Charge/Discharge Controller DC 1V-99V/120V Voltage Monitor Battery Protection Lithium/Lead-Acid Battery Tester DC 8V-86V

• I am an international seller

Our shop sells the most popular 3C consumer electronics products,such as mobile phone accessories,computer accessories,game peripherals,smart wearables,and follow the most popular fashion trends. If you like our products,please follow us,become our follower and fan.We will provide you with the most popular products to satisfy your fashion shopping experience.Model Number : S-803B,WJZH-803,WJZH-802Condition : NewType : Voltage RegulatorBrand Name : ISOrigin : Mainland ChinaItem : Battery Charge/Discharge ControllerBattery Discharge Controller DC 8V-86V
1.Description:
It is a Battery Discharge Controller DC 8V-86V Battery Voltage Monitor Protector Lithium/Lead-Acid Battery Tester.
2.Feature:
1>.Battery overvoltage or undervoltage protection
2>.Start discharge voltage and stop discharge voltage or discharge extension time can be set arbitrarily
3>.Effectively extend battery life
4>.Automatic power off
3.Parameter:
1>.Input voltage: DC 8V-86V
2>.Output voltage: DC 8V-86V
3>.Discharge delay time: 0-200 minutes
4>.Discharge delay time: 0.1V
5>.Control precision: 0.1V
6>.Output type: Active direct output
7>.Load power: 8V-86V/30A
8>.Voltage error: ±0.1
9>.Work Temperature: -25℃~85℃
10>.Work Humidity: 5%~95%RH
11>.Size: 90*62*30mm
4.Instruction for use:
1>.Long press the setting key for 3 seconds to enter the setting mode;
2>.When the discharge indicator is blinking, press the up and down key to adjust the start discharge voltage;
3>.In Setup mode, short press the setup key to switch start, stop and discharge delay adjustment;
4>.When the stop indicator is blinking, you can adjust the stop discharge voltage by pressing the up and down key;
5>.When the discharge and stop indicators are blinking at the same time, you can adjust the discharge delay time by pressing the up and down key;
6>.In the setting mode, hold down the setting key for 3 seconds to save and exit the setting mode;
7>.When the voltage is detected to be equal to or less than the set stop discharge voltage, if there is a discharge delay, the discharge and stop indicator will flash, the battery continues to discharge, to the set discharge delay time, the discharge and stop LED light will stop discharge.
5.Failure analysis:
1>.The voltage cannot be set. Please set the stop discharge voltage first, and then set the start discharge voltage. The discharge voltage is greater than the stop voltage;
2>.Start frequently and increase the difference between start and stop;
3>.If no, check whether the output light is on. If it is not on, it indicates that the output has been started. If the output light is on, it indicates that the output has been started;
4>.If the discharge does not stop and the output light is on, it indicates that the discharge has started. If the discharge does not stop, it may not reach the set stop threshold or the stop voltage needs to be reset;
5>.If no discharge is generated, check whether the battery voltage reaches the preset discharge voltage or the preset discharge voltage is too high. Charge the battery or reset the discharge voltage.Battery Charge Controller DC 1V-120V
1.Description:
It is a Battery Charge Controller DC 1V-120V Battery Voltage Monitor Protector Lithium/Lead-Acid Battery Tester.
2.Feature:
1>.Protect the battery from overcharge
2>.Start voltage and stop voltage can be set arbitrarily
3>.Effectively extend battery life
4>.Automatic power off
3.Parameter:
1>.Input voltage: AC 90-260V
2>.Output voltage: AC 90-260V
3>.Discharge delay time: 0.1V
4>.Control precision: 0.1V
5>.Output type: Active direct output
6>.Voltage error: ±0.1
7>.Work Temperature: -25℃~85℃
8>.Work Humidity: 5%~95%RH
9>.Size: 90*62*30mmBattery Charge/Discharge Controller DC 1V-99V
1.Description:
It is a Battery Charge/Discharge Controller DC 1V-99V Battery Voltage Monitor Protector Lithium/Lead-Acid Battery Tester.
2.Feature:
1>.Protection Prevents battery overcharge
2>.Protection Prevents battery overdischarge
3>.Effectively extend battery life
4>.Start voltage and stop voltage can be set arbitrarily
3.Parameter:
1>.Product name: Battery Voltage Monitor Protector
2>.Model: S-803B
3>.Battery voltage: 1-99V
4>.Rated current: 30A
5>.Work Temperature: -25℃~85℃
6>.Work Humidity: 5%~95%RH
7>.Size:90*62*30mm
4.Application:
1>.Suitable for lead-acid batteries;
2>.Suitable for vehicle battery and new energy electric vehicle battery charging;
3>.Suitable for lithium ion batteries, polymer batteries;
4>.Suitable for all electric two-wheel or three-wheel batteries in the voltage range.
5.Instruction for use:
1>.Hold down the setting key for 3 seconds, P01 flashes;
2>.Press the Set key once, The V1 voltage flashes, Press the Up or Down key to select required ;
3>.Press the Up or Down key once, The V2 voltage flashes;
4>.After setting V1 and V2, hold down the Settings key for 3 seconds to save the Settings and exit.
6.Description of Working Mode:
1>.P01 charging mode: when the detection voltage is lower than V1 voltage, K.K contact is connected; when the detection voltage is higher than V2 voltage, K.K contact is disconnected;
2>.P02 discharge mode: When the detection voltage is higher than V2 voltage, K.K contact is connected; when the detection voltage is lower than V1 voltage, K.K contact is disconnected;
3>.P03 Switching mode within interval: when the detection voltage is between V1 and V2, K.K contact is switched on and other contacts are disconnected;
4>.P04 Switch on mode outside interval: when the detection voltage is between V1 and V2, the K.K contact is disconnected and the others are switched on;
5>.P05 fixed-point monitoring mode: when the detection voltage is higher than V1, K.K contact is connected, and when it is lower than V1, K.K contact is disconnected;
6>.P06 fixed-point self-locking monitoring mode: when the detected voltage is higher than V1 voltage, K.K contact will always be switched on until the artificial power failure;
7>.P07 fixed-point movement monitoring mode: When the detection voltage is equal to V1 voltage (±0.1V) each time, K.K touch is switched on;
8>.P08 voltage error correction, range of ±5V adjustable;
9>.P09 delay function: 1-200 minutes adjustable;
7.Setting Method Supplementary:
1>.After V1 and V2 are set in P01, the used in other modes are P01 . When setting, PO1 displays flashing, press the up or down key to select P01-P09 mode. Save and exit the setting mode must be operated in the working mode, and other modes do not support exit;
2>.In the normal display, long press up the key for 2 seconds, can close the digital tube display 2;
3>.In normal display, press down button to view the current working mode, lower limit voltage, upper limit voltage, error correction voltage.
8.Package:
1>.1pcs Battery Voltage Monitor Protector