ATU-100-0A 1.8-55MHz Mini Automatic Antenna Tuner 0.91inch

The shortwave automatic antenna tuner contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping the amateur radio HF band of 1.8-55MHz. Built-in lithium battery, 3.7V, 1500mAh, you can use Type-C cable to recharge it. Equipped with 0.91inch OLED display, you can see the data clearly. Automatically tuned and do not need control wires, suitable for most radio stations. You can have a try.



Features:

The shortwave automatic antenna tuner contains a set of 7 capacitors and 7 inductors, which allows it (with the largest configuration) to work effectively in a wide frequency band, overlapping the amateur radio HF band of 1.8-30MHz.

Made of quality material, wear resistance, with stable and reliable performance.

Built-in lithium battery, 3.7V, 1500mAh, you can use Type-C cable to recharge it.

Equipped with 0.91inch OLED display, you can see the data clearly.

Automatically tuned, no human and control wires are required, and it is suitable for most radio stations.

One button to on/off, easy to use very convenient.



Instructions:

Connect the radio, ATU antenna tuner and antenna.

For the first use, please set the output of the radio or amplifier between 20-30W, or the high- tuning can easily damage the antenna tuner.

Set the radio mode, use frequency modulation mode.

Choose the antenna band to use, use 20-30W in frequency modulation mode, press the radio PTT, observe the PWR and SWR of ATU antenna tuner.

ATU button TUNE use: short press (less than 1 second) ATU button, it is in reset state, long press (more than 1 second) ATU button is in tuning state.

If the SWR display of the ATU antenna tuner in the transmitting state is ＞2.0, it means that the antenna is detuned.6.You need to use an antenna tuner. Press and hold the ATU button tune to tune and observe the SWR value. If the SWR is greater than 3.0 after tuning, the antenna will be detuned. In serious cases, it is not recommended to use more than 30W , and the transmission should be controlled below 30W; If the tuning is completed, the SWR display is less than 2.0, and the maximum of 100W can be used for transmission.



Specifications:

Name: ATU100 Tuner

Material: aluminum alloy

Color: black

Display: 0.91inch OLED display

Charge: USB Type-C cable

Battery: 1 * lithium battery, 3.7V, 1500mAh (included)

Voltage: typical + 12 V (DC10-15V, 13.8V)

Working frequency: 1.8-55MHz

Maximum current consumption: 400mA

Maximum working : 100W

Maximum possible measurement : 150W

Minimum required to starts tuning: 5W

Minimum possible measurement : 0.1W

Measurement step for up to 10W: 0.1W

Measurement step with higher than 10W: 1W

measurement accuracy: 10%

Maximum installation inductance: 8.53uH

Minimum installation inductance step length: 0.05uH

Maximum installation capacitance: 1869pF

Minimum installation capacitance step length: 10pF

Number of panel buttons: 3 (ON/OFF, AUTO, TUNE)

Item size: 160 * 90 * 40mm / 6.30 * 3.54 * 1.57in

Item weight: 413g / 0.91lb

Package size: 175 * 122 * 55mm / 6.89 * 4.80 * 2.17in

Package weight: 465g / 1.03lb



Packing List:

1 * ATU100 Tuner

1 * Type-C Cable