This website uses cookies
This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeTools & Home ImprovementWelding & SolderingSoldering & Brazing EquipmentParts & AccessoriesBrazing KitsArgon CO2 Refilling Station Charging Adapter to Small
/product/68/0678822/1.jpg?9662)
/product/68/0678822/2.jpg?9662)
/product/68/0678822/3.jpg?9662)
Share this product
GH₵ 1,145.82
GH₵ 2,086.3645%
In stock
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 89.73 to Tema
0 out of 5
(No ratings available)Variation available
Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 89.73
Ready for pickup between 09 December & 12 December when you order within next 6hrs 0mins
Door Delivery
Delivery Fees GH₵ 101.63
Ready for delivery between 09 December & 12 December when you order within next 6hrs 0mins
Return Policy
Free return within 15 days for all eligible items.Details
Seller Information
haixia
86%Seller Score
8 Followers
Seller Performance
Shipping speed: Average
Quality Score: Excellent
Customer Rating: Excellent
Product details
Please check your tank thread before making order.
OD:22mm W21 8-14 / DIN477 / m22-14of your CO2 tank. common in:Russia , Korea Japan , UK , CLFrance , , , Switzerland ,Sweden , Ukraine , Germany . South AfricaCzech Republic , Singapore etc .
This item is used to refill your small Argon / Co2 tanks from your tanks so that you can refill your small tanks easily .
CO2 Refilling Station Charging Adapter Type:W21.8-14
How it works:
In order to use it correctly, please follow our instructions:
1. Cool for the Cylinder in the freezer for 1 hour.
2. Screw the CGA320/W21.8 connection to a commercial CO2 gas cylinder.
3. Disconnect the quick connector of the black adapter, and then tighten the black adapter to for the cylinder( must turn the knob on the top of the black adapter to the highest position,the whole process does not need to turn the adapter knob down to open for the cylinder,If the adjusting rod press down 6mm wide valve pin, this will close the valve and CO2 cannot enter)
4. Connect the quick connector
5. For most big cylinders: turn the big cylinder or lie it down.(some host tank has not the dip/syphon tube inside.)
6. Carefully Open the valve of the gas bottle(The valve on for the Cylinder closes the flow if it is opened to much. This will happen if you open the big cylinder too much / too fast. The trick is to open the big cylinder very carefully. You will hear the air flow. So to fill it successfull)
7. After about 15-20 sec., The cylinder is completely filled
8. Close valve of the gas bottle
9. Opening the bleed screw to drain residual gas
10. Unscrew the CO2 - done
Colour:Black
Material:Metal Package Contents:
1 * Charging Valve Connector Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
OD:22mm W21 8-14 / DIN477 / m22-14of your CO2 tank. common in:Russia , Korea Japan , UK , CLFrance , , , Switzerland ,Sweden , Ukraine , Germany . South AfricaCzech Republic , Singapore etc .
This item is used to refill your small Argon / Co2 tanks from your tanks so that you can refill your small tanks easily .
CO2 Refilling Station Charging Adapter Type:W21.8-14
How it works:
In order to use it correctly, please follow our instructions:
1. Cool for the Cylinder in the freezer for 1 hour.
2. Screw the CGA320/W21.8 connection to a commercial CO2 gas cylinder.
3. Disconnect the quick connector of the black adapter, and then tighten the black adapter to for the cylinder( must turn the knob on the top of the black adapter to the highest position,the whole process does not need to turn the adapter knob down to open for the cylinder,If the adjusting rod press down 6mm wide valve pin, this will close the valve and CO2 cannot enter)
4. Connect the quick connector
5. For most big cylinders: turn the big cylinder or lie it down.(some host tank has not the dip/syphon tube inside.)
6. Carefully Open the valve of the gas bottle(The valve on for the Cylinder closes the flow if it is opened to much. This will happen if you open the big cylinder too much / too fast. The trick is to open the big cylinder very carefully. You will hear the air flow. So to fill it successfull)
7. After about 15-20 sec., The cylinder is completely filled
8. Close valve of the gas bottle
9. Opening the bleed screw to drain residual gas
10. Unscrew the CO2 - done
Colour:Black
Material:Metal Package Contents:
1 * Charging Valve Connector Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Specifications
Key Features
Charging Valve Connector
Specifications
- SKU: GE779IP4FLMI2NAFAMZ
- Size (L x W x H cm): 20x16x6
- Weight (kg): 0.47
- Color: Black
Verified Customer Feedback
This product has no ratings yet.
/product/68/0678822/1.jpg?9662)
Argon CO2 Refilling Station Charging Adapter to Small
GH₵ 1,145.82
GH₵ 2,086.3645%
Questions about this product?
