Aquarium 12V Mini Water Pump Submersible Water Pump Aquarium Fountain Pond GreenGreen 12V

Name: Aquarium 12V Mini Water Pump Submersible Water Pump Aquarium Fountain Pond
Model: 816975
Material: ABS body+Stainless steel shaft
: Green
Life: more than 20000 hours
Water Head
12V：5M
Flow Rate
12V: 700L/H
Water temperature: -20 ℃ ~ 60 ℃
Humidity: -20 ℃ ~ 60 ℃
Suitable medium: water and other non-corrosive non-viscous .
Uses: refrigeration system, water circulation system, fountains and so on.
Size: (L)X(W)X(H) 80X48X63mm /3.15"X1.89"X2.48"(appr.)

Feature:
Instructions Included.
Completely submersible Pump.
The pump adapts to fresh and marine water.
Low consumption, low noise, do not bother your rest.
Have great pumping, increasing oxygen and water circulation function.
The pump offers an adjustable flow rate and is an excellent choice for both freshwater and saltwater applications.

ATTENTION:
1. Do not overpressure operation. 12V version is up to 12V. The highest 24V version is 24V. More than 10AH battery fully charged, if there is no limit pressure measures, will be over-pressure, can not guarantee their own supply voltage to be ed first.
2. Do not use the AC power, router power, the power of computer cats and many similar are not exchange can be used!
Ripple problem (the most prone to problems): A lot of transformers are half-wave rectification, the result is a lot of AC mixed components, the pump will be bad! Brushless water pump must be full-wave rectifier! If you do not understand, you can consult professionals!
3. Head problem: 3.2 meters head does not mean that the power can be sprayed 3.2 meters high, head is connected to the water outlet pipe, the water column in the vertical height of the water pipe. Jet height is much lower than the head!
4. The use of regulated power supply, switching power supply current of not less than 2A.
5. This pump is prohibited unauthorized disembly, because the ceramic shaft, sleeve is a sophisticated installation, demolition of non-professionals will be difficult to recover.
6. Does not allow ferromagnetic impurities, particles into the magnetic clutch and bearing friction; in the transport of easily crystallized or precipitated media to be promptly washed (Operation: stop to pour the water into the pump after perfusion, running 1min to emissions clean); When transporting media with solid particles, you should filter at the pump flow inlet.



Note:
Please allow 1-2cm differs due to manual measurement.
Make sure the fact voltage is same as the rated voltage on the pump with label before use.
Stop the pump working when the unchangeable cable is borken.
Cut the electricity before installing, uninstalling and clean the pump.