This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeElectronicsAccessories & SuppliesCamera AccessoriesCamcorder AccessoriesZOMEi Lotus Lens Lens Hood Suitable For SLR DV
GH₵ 54.72
GH₵ 109.4350%
3 units left
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 13.35 to Tema
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 13.35
Ready for pickup between 27 September & 02 October when you order within next 19hrs 21mins
Door Delivery
Delivery Fees GH₵ 25.25
Ready for delivery between 27 September & 02 October when you order within next 19hrs 21mins
Return Policy
Free return within 15 days for all eligible items.Details
Warranty
None
Seller Information
Multicolo
80%Seller Score
24 Followers
Seller Performance
Shipping speed: Average
Quality Score: Excellent
Customer Rating: Good
Product details
The design of the lens hood is basically designed to prevent unwanted external light from penetrating the lens, extending and blocking at the end of the lens;The dedicated lens hood is designed to match the focal length of its design lens.Suitable for most UV lenses.
Stop rays entering the lens in the extreme corner and reflecting in the lens.In the backlight, side light or flash photography, non-imaging light can be prevented from entering and smog can be avoided.
In the smooth and sidelight photography, it is possible to avoid scattered light from entering the lens.In light photography or night photography, ambient light can be prevented from entering the lens.
It can prevent accidental damage to the lens, and it can also prevent the finger from touching the lens surface by mistake. It can also shield the lens from wind, sand and snow.
Hoods are widely used in backlight photography and, in general, glare can be avoided. However, if the light source is close, glare may still occur. At this point, the hood can be blocked by hand on the side where the light source is located. Glare is eliminated, it is necessary to observe clearly from the viewfinder
Item color: black
Material: High-quality rubber
lens hood Size: 77mm
Product weight: 25g{including packaging}
Package Included:
1 * lens hood
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3384. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
Stop rays entering the lens in the extreme corner and reflecting in the lens.In the backlight, side light or flash photography, non-imaging light can be prevented from entering and smog can be avoided.
In the smooth and sidelight photography, it is possible to avoid scattered light from entering the lens.In light photography or night photography, ambient light can be prevented from entering the lens.
It can prevent accidental damage to the lens, and it can also prevent the finger from touching the lens surface by mistake. It can also shield the lens from wind, sand and snow.
Hoods are widely used in backlight photography and, in general, glare can be avoided. However, if the light source is close, glare may still occur. At this point, the hood can be blocked by hand on the side where the light source is located. Glare is eliminated, it is necessary to observe clearly from the viewfinder
Item color: black
Material: High-quality rubber
lens hood Size: 77mm
Product weight: 25g{including packaging}
Package Included:
1 * lens hood
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3384. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
Specifications
Key Features
- The design of the lens hood is basically designed to prevent unwanted external light from penetrating the lens, extending and blocking at the end of the lens;The dedicated lens hood is designed to match the focal length of its design lens.Suitable for most UV lenses.
- Stop rays entering the lens in the extreme corner and reflecting in the lens.In the backlight, side light or flash photography, non-imaging light can be prevented from entering and smog can be avoided.
- In the smooth and sidelight photography, it is possible to avoid scattered light from entering the lens.In light photography or night photography, ambient light can be prevented from entering the lens.
- It can prevent accidental damage to the lens, and it can also prevent the finger from touching the lens surface by mistake. It can also shield the lens from wind, sand and snow.
- Hoods are widely used in backlight photography and, in general, glare can be avoided. However, if the light source is close, glare may still occur. At this point, the hood can be blocked by hand on the side where the light source is located. Glare is eliminated, it is necessary to observe clearly from the viewfinder
- Item color: black
- Material: High-quality rubber
- lens hood Size: 77mm
- Product weight: 25g{including packaging}
- Package Included:
- 1 * lens hood
- Only the above package content, other products are not included.
- Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What’s in the box
1 * lens hood
Specifications
- SKU: 91954EA39IVXHNAFAMZ
- Model: Zomei Lotus Lens Lens Hood
- Production Country: China
- Size (L x W x H cm): 10.5x10x5.6
- Weight (kg): 0.054
- Color: multicolor
- Main Material: rubber
- Warranty Address: None
Verified Customer Feedback
This product has no ratings yet.
915 Generation ZOMEi Lotus Lens Lens Hood Suitable For SLR DV
GH₵ 54.72
GH₵ 109.4350%
Questions about this product?