915 Generation ZB2L3 18650 Battery Tester External Load

Detailed Information About The Product:

ZB2L3 battery capacity tester discharge type 1.2-12V external load capacity of the battery and other tests 18650. Tools, single-function, by controlling the load off and get real-time integrated discharge current capacity results.Maximum support 15V 3A discharged through the discharge voltage and current, itself does not discharge.Maximum capacity statistics support 9999Ah (9999000mAh). Automatically identify and develop appropriate battery termination voltage can also be manually adjusted.
Power supply voltage: DC4.5-6V (micro-USB connector). Operating Current: less than 70mA. Discharge voltage: 1.00V-15.00V 0.01V resolution.Termination voltage range: 0.5-11.0V. Supported by current: 3.000A 0.001A resolution. Maximum voltage measurement error: 1% + 0.02V. Maximum current measurement error: 1.5% + - 0.008A.
Error codes and their meanings:Err1: battery voltage is above 15V. Err2: battery voltage is lower than the termination voltage. Err3: Battery can not afford to load or discharge current line too much resistance. Err4: overcurrent (current exceeds 3.1A)
Note: Use the resistance of the discharge process, resistive load will seriously heat, please pay attention to safety!.This circuit voltage in order to improve the measurement accuracy, specially designed DC bias, when the terminal displays nothing then a small voltage does not affect the actual measurement, if you are shorting the input terminals (absolute 0V) will show 0
Instructions:1. The first test should be fully charged battery.2. Connect the battery to be tested positive to positive input, a negative input to the negative, can not be reversed (with load reversal may damage the circuit)! Load connected to the output of the positive and negative output, to work through the tester micro-USB power supply (not available desktop or laptop USB powered), then the battery voltage.

3. Direct start test need only one press of the "OK" button, the tester can automatically develop an appropriate termination voltage of the battery full charge voltage, and will start flashing after the test three times. Need to develop artificial termination voltage only when the battery voltage display state by pressing "+" or "-" buttons to modify the termination voltage display beginning with P, behind the representative voltage resolution 0.1V, set up after pressing the "OK "start testing.
4. After the start of the test the tester will control the load of the electronic switch is turned on, the test data shows that the process will release capacity (Ah), current discharge current (A) and battery voltage (V) between the wheel was. When the battery voltage reaches the set cut-off voltage, load control switches off the tester display data stays in capacity (Ah) and above and the corresponding indicator flashes quickly together, now displays the actual capacity of the battery is discharging capacity, about the press "OK" to terminate flashing allows stable data display, press again "OK" button to return to the power-on state can just repthe battery test the next section ......
Finished Size: 50mmX37mmX17mm (length X width X height maximum position size, contains copper foot height)
Colour:blue
Material:PCB

Package Contents:
1 x Tester Module

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.

About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.

About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.

About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
3. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !