This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeHome & OfficeTools & Home ImprovementMeasuring & Layout ToolsProtractorsWelding Inspection Scale Small Height Gauge Hi-Lo
GH₵ 255.72
GH₵ 485.8547%
1 units left
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 27.42 to Tema
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 27.42
Ready for pickup between 19 July & 24 July when you order within next 22hrs 29mins
Door Delivery
Delivery Fees GH₵ 39.32
Ready for delivery between 19 July & 24 July when you order within next 22hrs 29mins
Return Policy
Free return within 15 days for all eligible items.Details
Warranty
None
Seller Information
Nehami
60%Seller Score
10 Followers
Seller Performance
Order Fulfillment Rate: Excellent
Quality Score: Very Poor
Customer Rating: Good
Product details
The following is the detailed introduction about our products:
Root Weld spacing gauge:Easy operation determines rootweld spacing
1. Unlock the retaining screw and insert the gauge interior alignment stops between the two pieces of pipe to be fitted
2. Insert the leg with the longer taper into the root gap until it makes contact with both slides of the gap.
3. Re-lock the retaining screw, remove the gauge and read it
4. The scale is calibrated in fractional dimensions from 1/32 to 3/16 in 1/16 inch increments, the read-out you receive represents the amount of rootweld gap
DIY Supplies:Metalworking
Model Number:2924043
Internal Hi-Lo gauge:
4 quick steps check internal alignment
You can check the internal alignment of you fit-up quickly with the Hi-Lo gauge
1. Unlock the retaining screw. press the gauge legs beyond the barrel
2. Insert the legs (wired) into the root gap space or the two pieces of pipe to be fitted, turn the gauge 90°, being careful to apply a constant back pressure to the barrel
3. Hold the gauge as square as possible with the fitting to obtain an accurate reading. lock the retaining screw. reverse the 90° turn and remove the gauge, you're now ready to read the increment opposite the red line
4. When the red line aligns with the 1/32 increment line you have a good internal alignment and fit-up. misalignment can be determined from the zero line by increment marking of 1/16 inch
Color: black, silver
Material: Stainless steel
Package Contents:
1 * Wedling Single Purpose Gauge
1 * Portable leather bag
1 * User manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
7976. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
Root Weld spacing gauge:Easy operation determines rootweld spacing
1. Unlock the retaining screw and insert the gauge interior alignment stops between the two pieces of pipe to be fitted
2. Insert the leg with the longer taper into the root gap until it makes contact with both slides of the gap.
3. Re-lock the retaining screw, remove the gauge and read it
4. The scale is calibrated in fractional dimensions from 1/32 to 3/16 in 1/16 inch increments, the read-out you receive represents the amount of rootweld gap
DIY Supplies:Metalworking
Model Number:2924043
Internal Hi-Lo gauge:
4 quick steps check internal alignment
You can check the internal alignment of you fit-up quickly with the Hi-Lo gauge
1. Unlock the retaining screw. press the gauge legs beyond the barrel
2. Insert the legs (wired) into the root gap space or the two pieces of pipe to be fitted, turn the gauge 90°, being careful to apply a constant back pressure to the barrel
3. Hold the gauge as square as possible with the fitting to obtain an accurate reading. lock the retaining screw. reverse the 90° turn and remove the gauge, you're now ready to read the increment opposite the red line
4. When the red line aligns with the 1/32 increment line you have a good internal alignment and fit-up. misalignment can be determined from the zero line by increment marking of 1/16 inch
Color: black, silver
Material: Stainless steel
Package Contents:
1 * Wedling Single Purpose Gauge
1 * Portable leather bag
1 * User manual
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
7976. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! ! !
Specifications
Key Features
- DIY Supplies:Metalworking
- Model Number:2924043
- Internal Hi-Lo gauge:
- 4 quick steps check internal alignment
- You can check the internal alignment of you fit-up quickly with the Hi-Lo gauge
- 1. Unlock the retaining screw. press the gauge legs beyond the barrel
- 2. Insert the legs (wired) into the root gap space or the two pieces of pipe to be fitted, turn the gauge 90°, being careful to apply a constant back pressure to the barrel
- 3. Hold the gauge as square as possible with the fitting to obtain an accurate reading. lock the retaining screw. reverse the 90° turn and remove the gauge, you're now ready to read the increment opposite the red line
- 4. When the red line aligns with the 1/32 increment line you have a good internal alignment and fit-up. misalignment can be determined from the zero line by increment marking of 1/16 inch
- Color: black, silver
- Material: Stainless steel
- Package Contents:
- 1 * Wedling Single Purpose Gauge
- 1 * Portable leather bag
- 1 * User manual
- Only the above package content, other products are not included.
- Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What’s in the box
1 * Wedling Single Purpose Gauge
1 * Portable leather bag
1 * User manual
1 * Portable leather bag
1 * User manual
Specifications
- SKU: 91954IP25LN7NNAFAMZ
- Model: Protractors
- Production Country: China
- Size (L x W x H cm): 18x6x2
- Weight (kg): 0.0605
- Color: multicolor
- Main Material: Stainless steel
- Warranty Address: None
Verified Customer Feedback
This product has no ratings yet.
915 Generation Welding Inspection Scale Small Height Gauge Hi-Lo
GH₵ 255.72
GH₵ 485.8547%
Questions about this product?