Product Name:UTP 4 Channel Passive Video Balun Transceiver
Impedance: BNC terminal: 75ohm;Connection terminal: 100ohm ;Frequency response: DC - 8MHz
Size: 10.3 x 5.7 x 2.8cm ;Weight: 184g;# CMRR (Common Mode Rejection ): 60DB #
Working temperature: -10°C - 70°C;
Storage temperature: -30°C - 70°C With working with passive transceiver and active transmitters allow signals transmission up to 330m and 1500m respectively.
This 4 Channel Video Balun allows the use of a shared or existing cable .
Video balun is to convert the video signal into the balanced signal applicable to be transmitted on common -5 unshielded pair wire with perfect transmission effect, which can be applied in the occasions such as video monitoring and video meeting and can transmit four channels of video simultaneously on an 8-core -5 pair wire. Package Contents:
1 x UTP Passive Balun
1 x 4 Channel UTP Balun adopt differential signal transmission with anti-jamming .
Save project wire expenses.
each a pair of pair wire transmits one channel of video signal Full motion CCTV video at distances up to 330m when used with any passive
UTP video transceiver.
Up to 1500m with any active UTP video receiver.
No power required.
Built-in transient suppression protection.
Applicable to NTSC, , SECAM and CCIR Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.