915 Generation Replacement Steel Needle for Ceramic Tile Leveling System To

Wear-resistant, recyclable. Easy to use in DIY operation.
Balance tiles in the same horizontal position. the installation speed of tile.
Reduce the fatigue/pressure of installers.
There is hardly any crackless, flat surface.
It reduces the need for grinding and polishing. Prevent tiles from moving during solidification. Avoid not removing the T-tile leveling system
1. Ceramic tile gaskets are 2mm or more ( gaskets are recommended)
2. When leveling, the cement or tile adhesives around T-type leveller must be cleaned.
3. Remove the T-type straightener about 5-6 hours after leveling the tile binder or cement is completely dried.
Type:Tile Leveling System
Use:100pcs Replaceable steel needle
Colour: Silver
Material: Stainless Steel
Size: Steel needle thickness: about 1.5mm, steel needle length: 32mm Package Contents:
100 x Steel Needles
Use Tips:
Lay the first tile, leaving more than 2mm (with gaskets). to tile.
Insert T-pins along the slit between tiles.
Then rotate 180 degrees and the T-needle is stuck at the bottom of the two tiles.
Adjust the lid with a hand/ wrench until the two tiles are on the same level.
After leveling, about 5-6 hours, the cement/binder is completely dry, rotate the lid in reverse and take out the 180 degree T needle until the word is removed. Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.