915 Generation PS100 N1201SA 140MHz-27GHz UV RF Vector Impedance ANT SWR Antenna Analyzer Meter Tester D1-005 with Inner Battery

Built-in high-capacity lithium-ion battery for mobile and outdoor use
Shutdown automatically saves the setting parameters without manual intervention After the power-on the interface settings are exactly the same as before the shutdown and the use is very worry-free
Can be used to test the antenna the impedance of the radio frequency devices
The instrument has four interfaces single point measurement scan function system information and calibration The default power-on interface is single point measurement

Working frequency 1375MHz~2700MHz
Frequency stepping 1KHz
Display 24 inch TFT resolution 320*240 QVGA
Battery 1 * lithium battery 2000mAh included
Power consumption Less than15W
Charging current 400mA
Charging interface USB for the time only as a charging interface data transmission is temporarily not open
Automatic shut-down can be set always open 5 minutes to 60 minutes optional
Measurement parameter resistance reactance standing wave S11
Resolution 4 significant figures
Frequency accuracy Less than ±3ppm
Connector SMA-K
Measuring range
Impedance 01ohm~1000ohm absolute value impedance
Standing wave 1000~65
S11 dB 0dB~-60dB
Error single point measurement
Impedance Less than impedance absolute value x 5% ± 01 ohm Z is less than 200 ohm Less than 15 GHz
Standing wave Less than effective reading x 10% ± 01
S11 dB° 01dB 5°0dB~-10dB 1dB 10°-10dB~-20dB 5dB 20°-20dB~-40dB
Directionality Less than 35dB 140MHz~2GHz after calibration Less than 30dB 2GHz~27GHz
Scan points 280
Output level -18dBm
Operating temperature 0~40
Atmospheric pressure 860hPa~1060hPa
ColourAs Shown
MaterialMetal

Package Contents
1 x Vector Impedance Analyzer
1 x USB Cable

Only the above package content other products are not included
Note Light reflection and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm