915 Generation Multifunction Inverter For Backlight Led Constant Current Bo

and high quality
Description:Not technical support. you should know how to use it. If not, twice your order. Thanks!
Product Name:Super universal interface 2P 6P 10P 12P full interface universal LED boost board LED high voltage board
LED connection must pay attention to the definition of the interface is only and negative points, the input power supply must not be reversed or wrong,
Improper connection caused by the consequences of their own, reminder, also understanding.
LED high-pressure board conversion instructions
1: Connect the power, ground, and switch signals required by the booster board to the universal LED booster board
VCC Power ON Switch Signal ADJ Brightness Control GND Ground
: Connect the same way as the LCD high voltage board
2: with a multimeter to measure the amount of LED light bar is the number of lines, which are a few negative which are the number of lines which are a few lines
Line is only in the more and negative points, in technology should not amount to see the original boost board can see out of the definition.
Size:12.3cm * 3.1cm
Interface definition: Outputs 12 interfaces
-3 + 4-3
-4 + 2-4
+ 3-9
-1 + 1
-2 + 2-2 electronic wire
-2 + 2-2FFC
-4 + 2-4
-3 + 4-3
-5 + 2-5 * 2
Small mouth * 2
Input: Power supply switch signal brightness control ground wire
(Same as LCD)
Not all of the interfaces are soldered on, we -installed one or more details see above description.
color: blue Material: plastic + metal
Package Included:
1x Universal Inverter
1x 4 pin cable
Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.