915 Generation Low Pressure Firep Failure Safety Control Valve Kit Heater Thermocouple Repment 58-18UNF

Only suitable for Low pressure application max BTU rating 50000
Suitable for heater fire pit firep if same connections

Specifications
600mm thermocouple with M8*1 threaded head
Bakelite knob OD 38mm D shaft 61mm
Operation Instructions
1 Fix the valve on a plate or board of your or fire pit by the head screw and flange
2 Connect your inlet and outlet hose on inlet and outlet side fix it tightly enough in case of leakage
3 Fix the thermocouple nut M8 on the valve end tightly Check if your valve end thread if 8mm you buy
4 Connect thermocouple and end thread
5 Open by size knob and push your valve around 5-10s till the thermocouple head is heated enough
6 Release your hand and it work properly If when you release hand valve shut off again check
If your thermocouple is always be heated on
If the thermocouple end is connected with valve
If the inlet and outlet side connect with hose you have
Colour yellow
Material copper

Package Contents
1 x Control Valve

Only the above package content other products are not included
Note Light and different displays may cause the color of the item in the picture a little different from the real thing The measurement allowed error is - 1-3cm